Building wood drawer dividers for existing drawers can be easy and easily customized for your drawers. With this simple plan, you can divide and conquer even the messiest of Junk Drawers.
1 - 1x3 @ 8 feet long
Cut to fit your drawers
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
One thing I learned when designing and developing this website was that you have to think in columns. The junk drawer is no different. First we need to divide it into columns. So take a measurement of the inside depth or your drawers.
That is of course after you have done the most difficult part - clean the drawer out and then remove it from the cabinet.
If you have an extra wide drawer like I do, you may wish to use two dividers. For a narrow drawer, just one divider down the center. First and foremost, consider what you will be storing inside the compartments. Bills? Envelopes? Letter sized paper? Pens and pencils? Take some time to consider as you plan your dividers. Lay the main dividers out as shown above.