Raised Pet/Cat Feeder - Small

Primary tabs

PDF versionPDF version

Additional Photos

About This Project

I didn't really use any of the construction techniques from the plan, but I got the idea based on seeing the platform feeder. I used spare wood (with routed trim already on it) that matched my bathroom, and made the cats a nicer looking feeder (one that they couldn't keep knocking to the floor and breaking!). The tile is mounted on cement hardibacker board, which is attached to the 3/4" wood platform. I used a zip saw to cut out the circles in the wood and the cement board (with the appropriate drill bit). I used a tile nipper to form the tile around the bowl opening. I added several coats of varnish to finish.

Pecan
Required Skill Level: 
Beginner
Finish Used: 
4 coats of General Finishes EnduroVar.

Comments