Double Saw Horse Workstation

Primary tabs

PDF versionPDF version

Additional Photos

About This Project

Kiln Dried Pine for the sawhorses and Whitewood for the desktop

I started out following the plans to a "t" and was going to make two of them. I got about half way through the first and decided to just turn it into a double work station. I decided to make the middle sawhorse slightly different for visual interest. I was also worried about how the desktop would line up with our window sill.

www.tommyandellie.com

I documented the whole build process here;

http://tommyandellie.com/index.php/2012/01/22/sawhorse-double-desk-details/

The paint and distressing is in this post:

http://tommyandellie.com/index.php/2012/01/26/sawhorse-paint-and-distress/

And the stain on the desktop is here;

http://tommyandellie.com/index.php/2012/01/28/sawhorse-steel-wool-aged-t...

Required Skill Level: 
Advanced
Estimated Time Investment: 
Weekend Project (10-20 Hours)
Finish Used: 
"Yucca Plant" paint for the sawhorses, gray stain for the desktop, General Arm-R-Seal poly, and Briwax for the desktop
Estimated Cost: 
100

Comments