Hello! I’m Ana, a mother and homemaker from Alaska.

Skeching

100’s of FREE plans!!

You can make ANYTHING!

stick

sticks

Rebecca Media Console-Side Hutch

April 19, 2012 |

2 Comments

posted by Ana White

PDF version

Build a media wall! Free plans for side hutch!

Additional Photos

Handmade from this plan >>

Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!

No brag posts have been found yet. Have you built this project? Please help other by submitting brag posts.

About Project

Author Notes:

HAPPY FRIDAY!!!

This week, I'm attending the most awesome craft blogging conference, SNAP! I thank everyone helping others out this week in comments and on our Facebook page in this week of travel or me. You are too kind.

And this week, a HUGE thank you to Rebecca for working with me to share new media wall plans!

Don't you just love this media suite?

From Rebecca:

These hutch additions totally make the media suite. The side pieces are more narrow than the whole unit, only about 8 inches. It is perfect for those narrower books, DVD's and lots of fun display space.

The plan is designed with a drawer on the bottom of the shelf. I personally decided not to do drawers, #1 because it required more wood than we had, and #2 because being this narrow, you really would only put remotes or small objects inside. But that is totally up to you!

Make sure you stop over and visit Rebecca at her blog for lots more tips and photos.

Thanks Rebecca!

Dimensions

Dimensions:

Dimensions are shown above

Materials and Tools

Shopping List:

1- sheet 3/4" Plywood
1- sheet 1/4" Plywood
4- 8ft 1x2's
1- 8ft 1x4 (or 54")

3/4 inch finish nails

1 1/4 inch pocket hole screws

wood glue

wood filler

120 grit sandpaper

primer

paint

paint brush

Tools:

measuring tape

square

pencil

hammer

safety glasses

hearing protection

Kreg Jig™

drill

compound miter saw

table saw

nailer

sander

level

Cut List

Cut List:

3/4" Plywood
2 @ 7 3/4" x 27 1/4"
6 @ 7 3/4" x 24"
4 @ 7 3/4" x 43 1/4"
1/4" Plywood
2 @ 25 1/2" x 35 3/4"
1x2's
4 @ 7 3/4"
6 @ 22 1/2"
4 @ 39 3/4"
2 @ 27 1/4"
1x4's
2 @ 25 1/2"
Molding for top
2 @ 27 1/4" (cut on miter, take measurements!)
4 @ 9 1/4" (cut on miter, take measurements!)

Cutting Instructions:

This is a shopping and cut list to build TWO of these. Please refer to the 3D version of the cut list (step 8 and 9) to see what you will need!

General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Step 1

Start by building the box. You can use either 11/4 ph screws or 2" countersunk screws and glue.

Step 2

These are for support and also act as drawer guides if you use drawers.

Step 3

Build the face frame first if you have a pocket hole jig. Otherwise attach with 2" finish nails and glue. Note to attach face frame to side overhangs are in opposite so you end up with a left and right hutch.

Step 4

Now add the top. Easy step. :)

Step 5

And the back. If you loose the drawer, bring plywood all the way down the back.

Step 6

Now crown ... Cut to fit, mirroring corners.

Step 7

And the drawer ...

Step 8

Bless Rebecca for putting together these layouts. She is too kind and helpful.

Step 9

Finishing Instructions

Preparation Instructions:

Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

May I Suggest a Finish?

One Step Color and Clear Coat Finish - Minwax...

Walnut Minwax Express Color on Cedar

Authentic Vintage Distressed Finish with Minwax...

Bookshelves, Buffet, Hutch, Media and Entertainment Centers, dining room, living room, storage and organization, Advanced, Cottage

2 Comments

clips

breakdown plans

Those sketch ups of how to break down the boards are exactly how I end the prep of every project I do. I don't want to buy one extra foot of a board that I don't need if I can help it.

posted by wesleyjack | on Fri, 2012-04-20 10:26

Interesting

I like this post so much! Even thought I am busy with clubbing in London, I want to keep up with the fashion. Both sides,cool clothes and cool furniture. I think this webside is great, I like it a lot!

posted by Roxanne Rox (not verified) | on Mon, 2012-10-08 14:06

My Book!

It's finally here! Get all the details on my first book!

Search

Let's Connect

Tweets

User login

Not Much >>

What's going on up here in Alaska.

Momplex Cam >>

We are DIYing our moms a Duplex in Alaska! Check out our progress so far as we owner build a home, step by step. Read the Momplex blog here.

Most Viewed Plans

New here? Check out our most popular free, step by step furniture plans.

Laundry Basket Dresser	Farmhouse Table
How to Build a Loft Bed	Flip Down Wall Art Desk
Ten Dollar Ledges	Simple Outdoor Dining Table
Sausha’s Washer/Dryer Pedestals	Farmhouse Queen Plans
Reclaimed-Wood Headboard, Queen Size	$10 Cedar Raised Garden Beds
Storage Sofa	Storage Daybed

Give Back

Getting Started

Plan Catalog

Other Stuff >>