Providence Table

Primary tabs

PDF versionPDF version

Additional Photos

About This Project

Here is my Providence Table made from scrap wood we had left from building our deck. I am not thrilled that it is made out of pressure treated wood but it is what it is. I used 2x6 mixed in with 2x10's for the top, 4x4's for the legs and used a 1/4 router bit for all the edges.

Pressure treated wood
Required Skill Level: 
Intermediate
Estimated Time Investment: 
Afternoon Project (3-6 Hours)
Finish Used: 
It is still drying out but the plan is to paint the legs white and the top a stain color.
Estimated Cost: 
free from scrap

Comments