Make barn style door! Free DIY plan from Ana-White.com
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
2 - 1x6 @ 21 1/2"
1 - 1x12 @ 21 1/2"
2 - 1x3 @ 78"
1 - 1x3 @ 44 3/8" (long point to short point, ends are parallel, both ends cut at 25 degrees off square)
2 - 1x3 @ 22 1/8" - (one end at 40 degrees off square, other end at 25 degrees off square, ends in OPPOSITE directions, longest point measurement)
2 - 1x2 @ 78"
1 - 1x3 @ 23 1/2"
1 - 1/2" exterior plywood piece @ 55" x 23 1/2"
For this door, we built the frame with a Kreg Jig, and then attached plywood to the back. Measure your overall opening first and build to suit your opening.