Gaby Kitchen Island

Primary tabs

Gaby Kitchen Island

Gaby and Andres, two of the kindest people I’ve ever met, needed an island to add storage and functionality to their kitchen. Gaby loves all things Restoration Hardware (which automatically means that we are soul mates) and really liked the look of Restoration’s Salvaged Wood Kitchen Island. There were three problems with the store bought island: 1. It’s $3000. Holy crap. 2. It was way too big. 3. They really wanted drawers for additional storage. So, together we came up with this project plan.

For the full plan, visit: http://www.oldpaintdesign.com/2012/06/29/gaby-kitchen-island/

Enjoy!

HANDMADE FROM THIS PLAN >>

Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!

Pages

General Instructions: 

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Dimensions: 
Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Project Type: 
Estimated Cost: 
Room: 
Skill Level: 
Style: 

Comments