Nesting Box - Single

Primary tabs

PDF versionPDF version

Additional Photos

Seems like just yesterday we brought home baby chicks, hoping someday to have fresh eggs in our own backyards.

The girls went through an awkward teenage stage, but are now full grown ladies, running happily and freely around our yard.

Laying chickens running around your yard really ARE all that. We so enjoy them. And they eat bugs and scrap food and just generally are a wonderful addition to our home.

But one day, we found this in the woods near our house.

Delighted. Surprised. Amazed.

We have eggs!

And because I haven't gotten around to building a permanent coop for the girls yet, they have no nesting box! So of course they are going to go out in the woods and make their own nest, whether we know about it or not.

So I went out in the garage and built a quick nesting box out of a 1x12 board, a few cedar fence pickets and some scrap 1x2s.

Will the girls like it?

That looks like a nice little nesting box, she says.

Hmmmmm .... looks nice and clean and cozy ....

I'm going to have to take a look inside!"

Look at that, Runny! This place even has a vaulted ceiling!"

Do they like the nesting box? Does it work?

Well let me tell you what happened at 5:48AM this very morning.

We woke up to very load squalking. And squabling.

I jumped out of bed and ran outside, fearful a predator was in the yard.

But instead, I saw Stripey in the nesting box.

And Scramble waiting outside.

And I know what they were saying.

Stripey: I need some privacy. Can you just give me a minute?

Scramble: You've been in there all morning! I need to use the nesting box now ... I can't hold it any longer!

Stripey:I can't do my thing with you watching! Can you bring me a magazine?

Seems I'll be making another nesting box!

I did modify this plan a little just because when I built my nesting box, I was pulling from my scraps. You can do the same, but if you are buying new boards, I wanted to minimize the number of new boards you would have to buy. Also, I removed the divider because the hens seemed to not like it - maybe it wasn't tall enough?

PS - The chair plans are in my new book releasing October 9th!

Dimensions: 
Dimensions are shown above.
Dimensions: 

1 - 1x12 @ 4 feet long
2 - 72" long cedar fence pickets
1 - 1x2 @ 2 feet long
2" exterior wood screws

Tools: 
measuring tape
square
pencil
safety glasses
hearing protection
drill
circular saw
sander
countersink drill bit
Cut List: 

2 - 1x12 @ 16 1/2" (longest point measurement, one end cut at 20 degrees off square)
1 - 1x12 @ 12"
2 - 1x2 @ 12"
4 - 5 1/2" wide cedar fence pickets @ 13 1/2" long
3 - 5 1/2" wide cedar fence pickets @ 15 1/2" long

Project Type: 
Room: 
Skill Level: 
Style: 
General Instructions: 

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Step 1

I put this nesting box together with just 2" screws and a countersink bit. NOTE: You can always raise the floor up too.

Step 2

Add the top supports.

Summary: 

Build a nesting box with free plans from Ana-White.com

Step 3

Now just add the cedar fence pickets to back and front.

On mine, I actually just used a scrap 1x4 for the front, but because you will have cedar fence picket scraps, I used those in the plans.

Step 4

And then just dry fit the roof boards on top. When you are happy, start at the bottom and work your way to the top. Easy peasy!

Finishing Instructions

Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

Comments

I would love to get chickens, but I'm really afraid the hawks, fox, raccoons, and coyotes would cause big problems around here. We may try it and see how it goes...great nesting box plan if we do decide to hatch some yellow fluffballs!

pinktoesandpowertools.com

I don't do chickens- wish we could have then in our neighborhood! Maybe back to back instead of side by side? That would provide at least some visual privacy! Silencing a chicken in action might not be as easy!

What will you do with the chickens in the winter? Won't it be getting too cold for them pretty soon?

I was just talking with my daughter yesterday about nesting boxes!

I have a desire to have a few chickens for eggs and we were discussing the need for coop and nesting boxes..I found this in my feeds today! Perfect timing
THANKS!

I cannot seem to find any way to upload a brag although I see that thousands of you are able to do it.

ANY ADVICE? I thought I would be able to do it after signing in, but there is no link or tab that alows me to do it.

There are three blue boxes in the left margin. Click on the one that says "give back". The small print underneath says "contribute brag posts and plans".

Love the nesting box but how are you planning on keeping your chickens warm this winter? Are coop plans in the works?

I love that you were able to pull this off so quickly for the chickens. Ana, your added dialog had me laughing out loud! I had to read it to my four year old and show him the pictures. He also thought it was funny! Thank you for sharing!

little-Stuf

As long as hens are in an insulated, non-drafty, well-proportioned coop through the winter, they keep themselves warm. I'm not quite as far north as Anna (I'm in central Alberta, Canada) but I know several small-scale hen-keepers in my area who have had no problems with their hens keeping warm in the winter -without ANY source of heat. In fact, it's important to ensure there is ventilation in a coop or the girls can make the coop too warm and too damp from their breath.

*note* if a person wants eggs through the winter, the girls are going to need some kind of light, if I remember correctly, they need 15 hours of day light in order to lay.

I'm working on my own coop right now!

As someone who is completely freaked out by chickens I must tell you that "stripey" is a Bared rock I believe and they happen to be the nicest softest chickens in the world. If she will let you pet her and talk to her you will see how silky her feathers are compared to any other chicken. They are the only ones I have ever liked.

I love your nesting box and your site. Your ideas are wonderful and I am always amazed at your creativity and ability to design complex items in a way that most people understand.

As I was looking at the photos of the nest box I noticed that the roof was a little odd. If you add a strip of shingle underneath the lower-most shingle, it will kick-out your first course to match the rest of the roof. I use this technique on the historic buildings I restore and it stops the lower most course from having a "flat" look to it.

Keep up the great work and congratulations on your new book.

Dan

Fantastic - I work in a hardware store and we have heaps of off cuts from different timbers that are just thrown in the bin! - Will be saving everything I can find now for when we can finally get some chooks....any plans for a coop? - We want to get about 8-10 girls...thanks so much for such a wonderful site!!!!

Looking at the hens, and the divided nest box ... the two nest areas were too small for those chickens. They need room to turn around while standing in the middle of the nest area, and they would be bumping the walls with their butts and tripping on the divider.

Measure your hens from breast to butt (that's "one hen length)", and make the nest box between 3/4 to 1.25 hen lengths squared. If you have a mixed flock with some bantam hens, make them a couple of smaller boxes sized to their needs.

Pages

HANDMADE FROM THIS PLAN >>

Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!

Pages