This project was quick and simple. Just keep in mind and pay attention to the plans where they state "bevel" or "miter". There is a difference!
This project was free to me as we have a huge amount of 2x4 studs left over in our garage from a previous project so I should be able to do the table and another bench for free as well.
It went together within a few hours as the cuts are easy.
Working on the camp loft bed now with some mods to add a stationary bed beneath and more height for my girls room.
Overall great build.
I stained it with one coat of Kona. I did let the stain sit and barely wiped it off that is why it ended up being very dark which is the look I was going for. I then finished it off with 4 coats of polycrylic clear in high gloss which dries very fast and does not yellow.
I'm hoping for this to be my first project!! How do i get the plans ??
how do I get the plans for this project
I just found the plans for the Providence Bench on this site good luck...http://ana-white.com/2012/04/plans/providence-bench
Hi - would it be possible to get these plans also? Thx so much, it looks like a fun project with fast results. jamie
I'D LOVE TO MAKE THIS PROJECT FOR MY ENTRANCE HALL...! THANK YOU FOR SHARING!!
how do I get the plans for this bench?
There is a clickable link above where it says "Blog Link: Build a Providence Bench"
Here are the plans for the Providence Bench on this site good luck...http://ana-white.com/2012/04/plans/providence-bench
If you appreciate the free content of this site, please thank our sponsors.
It's finally here! Get all the details on my first book!
What's going on up here in Alaska.
We are DIYing our moms a Duplex in Alaska! Check out our progress so far as we owner build a home, step by step. Read the Momplex blog here.
New here? Check out our most popular free, step by step furniture plans.
Check out how we DIYed a full kitchen here!