Farmhouse Table

Primary tabs

PDF versionPDF version

Additional Photos

About This Project

This is a massive Farmhouse Table. It measures 126" x 56" with the extensions on, as show. It is 96" x 56" without. The table top is 2x12's with 2x8 breadboards and it has 4x4 legs and end stretchers. It was modified from the farmhouse plan here on ana-white.com and from tommyandellie.com.

yellow pine
Required Skill Level: 
Intermediate
Estimated Time Investment: 
Week Long Project (20 Hours or More)
Finish Used: 
We used 1 coat of Miniwax Dark Walnut and 2 coats of Poly in a satin finish.
Estimated Cost: 
approx $225

Comments

We lucked out on those. A family member's church was giving them away a few years ago and we scooped them up for free. I will get their info so that you might search them out and reply again for you.

The extension idea came from tommieandellie.com. The extensions are each made up of 2 beadboards each cut to the width of the table, 56" here. They also consist of a 2"x2" crossmember of 30" here and 2-2"x2"s 38" in length and cut on a 45 angle on on end. The beadboards are joined by pocket holes. the crossmember is centered on the beadboard that will be closets to the table, it is here to provide support for the last 2 pieces. These last 2 pieces are pieces that will slide into notches cut in the end apron and inside apron. They are placed with the angled edge about an inch from edge of the what will become the most outside end when the extensions are slid into place. The extensions slide into notches cut 1.5"x1.5" end apron and inside apron pieces 30" apart and centered. A lot of words that I am sure didn't explain anything. Mine are just modification of the plans on the referenced site.