Toy Storage Entertainment Center

Primary tabs

Toy Storage Entertainment Center

TV Stand, DVD / Blueray Storage, Large Toy Cabinet, Small Toy Box & Bookshelf. Keep the TV up away from dirty fingers & flying toys while storing those large toys in a large cabinet underneigth. Then keep the smaller toys in a attached toy box and books on the above book shelf.

http://nightfireranch.wordpress.com/

Rustic Entertainment Center with Toy Storage
DVD Storage
Bookshelf & Toy Box
Cabinet
Design

HANDMADE FROM THIS PLAN >>

Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!

Author Notes: 

This was designed and made with planed rough lumber. So all dimensions of lumber are true dimensions. Ie. 2x6 & 2x8 measure 2" by 6" and 2" by 8".

Shopping List: 

Lot's of 2x6's, 2x8's, 1x6's and a large bag of screws.

1 1/2 inch screws
3 inch screws
wood filler
120 grit sandpaper
Tools: 
measuring tape
square
pencil
hammer
safety glasses
hearing protection
drill
circular saw
table saw
sander
level
General Instructions: 

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Dimensions: 
Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Skill Level: 
Style: 

Comments