Finea 4-Drawer Dresser

PDF versionPDF version
Finea 4-Drawer Dresser

Additional Photos

Finea 4-Drawer Dresser

These plans are for a modern dresser with four roomy drawers and an open shelf to boot! Come build your own with Get the full plans here:

60" wide x 35 1/2" tall x 19 1/2" deep
Finea Dimensions
Kreg Jig: 
Project Type: 
Skill Level: 
Estimated Cost: 
General Instructions: 

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!


A modern dresser with four roomy drawers and an open shelf to boot! Get the full plans here:

Finishing Instructions

Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.


Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!