1. Home
  2. Community Brag Posts

Closet Storage

Submitted by erik99703 on Thu, 03/07/2013 - 21:14

My daughter has a small walk-in closet, so I wanted to make some storage bases. I had a full sheet and half sheet of plywood each ripped into 4 pieces, with each piece 11 3/4" wide. I then built the sides and corner shelves separately and connected them with connector bolts. I have since added doors to the shelf on the left.

Estimated Cost
$75
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Rustoleum flat white primer and flat white paint
Recommended Skill Level
Beginner

Comments

erik99703

Fri, 03/08/2013 - 14:53

Good catch Gina - it's actually a sheet and a half of 3/4" ply, with some to spare. I forgot that I had to make another trip to get the extra half sheet (I made this a month ago). The corner unit also has 1/2" ply for the back, and since I was painting it, I bought the cheapest plywood I could. The vertical dividers are also made with scrap pieces of 1x pine I had lying around.