Rustic X Console

Submitted by Dee015 on Fri, 03/01/2013 - 17:56

Always been interested in wood working and found this site that is incredibly easy to follow with awesome plans - Thanks Ana.

This was my first project and overall the wood cost about $50 with left overs. I used framing wood SPF and the friendly workers at Home Depot explained all about wood and finding wood that isn't shaped at odd angles or bent.

I bought a Mitre saw 10 inch blade for $99.

I bought the Kreg Jig for $99.

Gel Stain costs $25 for a large can (I used on another project).

To my amazement a box of screws costs $30 but you get a few hundred.

So some of the the things to watch for - for any newbies like me out there:

If you buy a very powerful drill careful not to push really hard or you find your screw goes through 2 inches of solid wood and you are left with a gaping hole.... resulting in you starting over again...

If you don't set your kreg jig to clamp down on your wood, with the wood being level at the base of the kreg jig, the wood raises slightly. This results in your drilled hole to go deeper and screws to pop out the face of your project... nice surprises when you are sanding.

Estimated Cost
First project - summary.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Varathane Gel stain

Varathane finish
Recommended Skill Level
Starter Project

Comments

Jamaunzie

Sat, 03/02/2013 - 14:38

Your work looks great as I was reading about your adventure I couldn’t help but chuckle and node my head yep.
Welcome to the wonderful world of woodworking land of the bold, adventurous, self confident, and satisfied people