2x4 Craft Table

Primary tabs

PDF versionPDF version
2x4 Craft Table

This table has a great workspace to spread out for all your crafty endeavors. Whether it's sewing, scrap booking, or painting, I'm sure you could use a little more room to work! I sized it to fit a space in my home, and you can easily adjust the measurements to fit whatever space you need. Not too crafty? This would also be a great dining table for small spaces, or you could tuck a chair under it for a great desk! This is an easy project and the entire thing is made of standard 2x4 boards. Find the full plans here: http://www.morelikehome.net/2012/10/day-30-build-2x4-craft-table.html

Dimensions: 
39" wide x 30" tall x 31 1/2" deep
Dimensions: 
2x4 Craft Table Dimensions
Kreg Jig: 
0
Project Type: 
Skill Level: 
Estimated Cost: 
Style: 
General Instructions: 

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Summary: 

This table has a great workspace to spread out for all your crafty endeavors. Whether it's sewing, scrap booking, or painting, I'm sure you could use a little more room to work! I sized it to fit a space in my home, and you can easily adjust the measurements to fit whatever space you need. Not too crafty? This would also be a great dining table for small spaces, or you could tuck a chair under it for a great desk! This is an easy project and the entire thing is made of standard 2x4 boards. Find the full plans here: http://www.morelikehome.net/2012/10/day-30-build-2x4-craft-table.html

Finishing Instructions

Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

HANDMADE FROM THIS PLAN >>

Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!

Pages