Outdoor Wall Panel System

Primary tabs

PDF versionPDF version
Outdoor Wall Panel System

Additional Photos

Outdoor Wall Panel System

This is a great way to give your patio a summer makeover! These plans are for a modular wall panel system. It's perfect for making an outdoor space feel cozy and inviting, and it's totally customizable! These plans for a basic panel & shelf (and of course you can use the panels without shelves!). You can get the full plans here: http://www.morelikehome.net/2013/06/diy-outdoor-wall-panel-system-plans....

Dimensions: 
31 1/2" wide x 62 1/4" tall x 10 1/2" deep
Dimensions: 
Outdoor Wall Panel System
Kreg Jig: 
0
Project Type: 
Room: 
Skill Level: 
Estimated Cost: 
Style: 
General Instructions: 

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Summary: 

This is a great way to give your patio a summer makeover! These plans are for a modular wall panel system. It's perfect for making an outdoor space feel cozy and inviting, and it's totally customizable! These plans for a basic panel & shelf (and of course you can use the panels without shelves!). You can get the full plans here: http://www.morelikehome.net/2013/06/diy-outdoor-wall-panel-system-plans....

Finishing Instructions

Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

HANDMADE FROM THIS PLAN >>

Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!

Pages