Rainbow Connection

Submitted by GarrettLee on Tue, 06/25/2013 - 06:23

I adjusted the plans to shorten the table to 70 inches, taking out one of the pedestals in the process.

For the finish, I used 6 different colors of the Miniwax Water-based Wood Stain. Working with 2-3 at a time, I blended them into each other (work WITH the grain!!!). I purchased custom stencils online for the border and used a Polycrylic spray (3-4 coats), then stained over top and wiped off the excess.

Similarly, on the stretcher, I taped off a chevron pattern with painters tape. Then I sprayed with the Polycrylic, and stained over top of it.

We love this table!

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Miniwax Water-Based Wood Stains
Polycrylic protective Finish
Recommended Skill Level
Beginner

Comments

MW

Tue, 07/30/2013 - 20:56

Hey! I was wondering where you got the stencils, and how you applied them??

GarrettLee

Fri, 08/02/2013 - 04:17

I purchased the stencils from http://www.stencilsonline.com/. You can enter whatever text you like and adjust the size and font. Each phrase I ordered came in one long stencil. Total cost was about $60 for the two of them.

I taped paper over the tabletop so just the edges were exposed, and then I laid the stencil over the wood. I then sprayed 3-4 coats of Miniwax Polycryclic Spray http://www.amazon.com/Minwax-34444-Water-Based-Polycrylic-Semi-Gloss/dp…. After it dried, I applied the stain (Miniwax Water-based). Then I wiped it off with a cloth. It takes a little rubbing to get the stain to come off the poly. I would suggest testing the process on some scrap so you can get an idea of the process.