Based on the original rustic-x-coffee-table. Modified the length, width and height dimensions to fit our needs. To accommodate our desired widths, we mixed 2x4 and 2x6 boards. Followed the theme for a side table as well.
The cross braces used 1/2 depth mirrored dados in each full brace instead of 1 full and 2 cut pieces (this was done using a series of partial depth cuts with a sliding-compound miter...I don't own a table saw...yet).
Finishing was done using steel wool + vinegar, followed by satin poly. We wanted to have more protection and a little more "warmth" than a wax coat. Two coats of poly thinned by 1:1 mineral spirits was used to keep coats light with minimal build up. A light sanding to bring down grain-lift was done after the first coat. This allowed some of the fine wood texture to come through that would be lost with a typical 3-4 full strength poly coats.