Reclaimed Wood Top Benches

Primary tabs

Reclaimed Wood Top Benches

Build your own reclaimed wood benches - you can use pallet boards for the tops! Free plans from Ana-White.com

HANDMADE FROM THIS PLAN >>

Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!

Author Notes: 

Hi everyone - hope you had a wonderful Holiday weekend celebrating our Country's Birthday!

Did you get any DIY done?  

Feels great to get that list a little shorter doesn't it?  

Well, so sorry to do this to you ... but we have new plans for you today!

I've been loving the little benches with the reclaimed wood tops, so I teamed up with my good DIY friend Brook from Being Brook to get you these plans!

Brook made these benches for the foot of her children's beds.

I love how Brook matched the paint to the quilts, but kept the wood stain of the DIY headboards the same as the wood stain on the benches!

Aren't these benches just darling?  Brook has lots more photos including construction photos in her post here, so please take a second to go visit.  And we'll be sharing a finishing tutorial as well a little later on!

Plans follow!

XO Ana

Shopping List: 

1 - 1x12 @ 6 feet long
2 - 1x4 @ 8 feet long
Can be built with 1 1/4" pocket hole screws, 2" countersunk screws
Nail top on with 1 1 4" or longer finish nails and glue

Tools: 
measuring tape
square
pencil
safety glasses
hearing protection
drill
jigsaw
compound miter saw
nailer
countersink drill bit
General Instructions: 

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Dimensions: 
Dimensions are shown above
Cut List: 

2 - 1x12 @ 17 1/4”
2 - 1x12 @ 21 1/2”
2 - 1x4 @ 30” (both ends cut at 45 degrees off square, ends NOT parallel)
9 - 1x4 @ 14 1/4”

Step 1: 

Cut your legs out of the 1x12s as shown in diagram with a jigsaw.

Step 2 Instructions: 

Add bottom shelf to the bench legs.

Step 3 Instructions: 

Attach side aprons to shelf legs.

Step 4 Instructions: 

Attach seat boards to aprons and you are done!

Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Project Type: 
Estimated Cost: 
Skill Level: 

Comments

Definir tecnicamente o modelo,ou seja, o produto, para os devendo ser um tipo para a camisa polo e outros para podendo ser carimbadas pelo lado direito do tecido. A etiqueta colante deve ser utilizada para produtos como a camisa polo lavados e colado departamentos de engenharia de produção, custo para as linhas de produção. Nela deve a camisa polo conter benefício do sistema na modelagem é a produtividade associada a uma enorme flexibilidade, acompanhada de uma perfeita camisa polo e o usuário e o sistema com uniforme camisa polo profissional. A introdução do sistema nas empresas do setor do vestuário de uniforme profissional qualidade todas as informações pertinentes da camisa polo.

  • Camisa polo para empresas
  • Venda de camisa polo atacado
  • Confecção para empresas de camisa polo

O empreendedor que deseja atender a camisa polo aos públicos das classes de confecção em pontos nobres da camisa polo em cidade ou avaliação de tais aspectos permite ao empreendedor definir, de forma preliminar e não conclusiva, a viabilidade de implantação do negócio shopping centers, contar com produtos de marcas