Modified Shanty2Chic Rolling Rustic Wood Dresser

Submitted by gusnoll on Wed, 08/07/2013 - 21:47

I modified Whitney's (Shanty2Chic) Rolling Rustic Wood Dresser slightly because I didn't want to have mine on wheels. Other than that, I basically followed her plans and advice! I used Maple plywood with poplar boards. With a dark stain they are a good match. I did use 3/4 maple plywood for the dresser drawers instead of 1x8" boards to save money. My wife is happy and my boys love their new dresser--that's all that matters!

Thanks, Anna, for this great site!

Built from Plan(s)
Estimated Cost
$250
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
3 coats of Early American Stain & 2 coats of polyurethane.
Recommended Skill Level
Intermediate

Comments

Adam Colburn

Wed, 08/14/2013 - 06:07

Really love how this came out! How big are those legs? I'm thinking of copying this design for my new place!

In reply to by Adam Colburn

gusnoll

Mon, 08/19/2013 - 20:23

Thanks, Adam. The legs are 3x3 poplar you can get a piece at lowes or home depot (can't remember which) but they are actually 3 1x3s glued together but you'd never know it. Anyways, they are 3 1/2" tall and I put an additional piece of my 2x2s underneath to support them, then the strip of 1x2 between the legs on the side that are pockethole screwed into them as well--this is where the true strength comes in.
good luck!

thogg4

Sun, 03/09/2014 - 06:28

Do you have a photo of the underside where the legs attach?