Hello! I’m Ana, a mother and homemaker from Alaska.
Skeching
100’s of FREE plans!!
You can make ANYTHING!
stick
img
sticks
img

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

November 27, 2013 |
posted by Ana White
PDF versionPDF version

21" DIY Kitchen base cabinet plans with full overlay door - Momplex White kitchen cabients.

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

Additional Photos

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)
21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)
21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)
21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)
21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

Handmade from this plan >>

Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!

About Project

Author Notes: 

I'll be the first to admit, I felt super intimidated when we first started working on the Momplex kitchen.

It's a big project for sure, and when you look at a finished kitchen, it can be overwhelming.

But what we did was to just focus on building one cabinet at a time, breaking a big project down into little manageable projects, and that made a huge difference in tackling this giant build.

We recently shared with you the step by step plans for building the 12" base cabinet (far left and hidden by fridge) and the 36" lazy susan pie cut corner base cabinet, so today, I want to share with you plans for the next cabinet in line - a 21" base kitchen cabinet with a door/drawer combo.

This was actually one of the easiest base cabinets tp build in this kitchen, because it's still small enough to be manageable, but not so tiny it's hard to get a drill in tight spots.

We again used PureBond Formaldehyde Free Plywood for the interior, special ordering a prefinished maple plywood (check at your local Home Depot) - so the only finishing we had to do was paint the face frames and doors on this cabinet!!!

That was a huge time saver!!!

We used poplar for the face frames and ordered our doors (more info on that coming soon) through Cabinet Now.

The plans follow for the 21" base cabinet - so check them out!!

XO Ana

IMPORTANT: Please read through these posts before building, as I show you step by step in pictures how we built these cabinets.

Planning and Layout

Base Cabinet Construction

Shelf Edge Banding

Drawer Installation (coming soon)

Base Cabinet Installation (coming soon)

Cabinet Door Installation (coming soon)

Base Cabinet Finishing - Toekick, Trim Etc (coming soon)

IMPORTANT: There are many different kitchen cabinet plans on this site - please make sure you use the same collection of plans for all of your base cabinets.  This plan is for the White Momplex Kitchen - with a plywood rip width of 22-1/4" and a toekick cutout of 4-1/2" x 2-1/2".  

Dimensions

Dimensions: 
21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

Materials and Tools

Shopping List: 

3/4" plywood ripped into strips 22 1/4" long (for sides and shelves)
3/4" plywood scrap from ripping sides and shelves (for top supports)
3/4" plywood ripped into strips 5" long (for base supports - use cheaper plywood here)
1x2s for face frames
1/4" plywood (for backs)
1-1/4" pocket hole screws
3/4" finish nails
edge banding for shelves

Tools: 
measuring tape
square
pencil
safety glasses
hearing protection
drill
jigsaw
compound miter saw
table saw
nailer

Cut List

Cut List: 

CARCASS
2 - 3/4" plywood @ 22 1/4" x 34 1/2" (side panels)
1 - 3/4" plywood @ 22 1/4" x 19" (bottom shelf)
2 - 3/4" plywood @ 5" x 19" (bottom supports)
2 - 3/4" plywood @ 3 1/2" (can vary in rip width) x 19" (top supports)
1 - 1/4" plywood @ 32" x 20 1/2" (back)

FACE FRAME
2 - 1x2 @ 27"
2 - 1x2 @ 21"
1 - 1x2 @ 18"

SHELVES
3/4" plywood @ 22" x 18 3/4" (measure and adjust to fit shelf pins)

DOOR/DRAWER FACE for FULL OVERLAY (1-1/4")
5 1/2" x 20 1/2" (drawer face)
22-1/2" x 20-1/2" (door)

General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Step 1

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

First, create the side panels - remember that the two side panels are mirrors of each other.

Step 2

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

The bottom shelf is attached 5" up from the bottom of the sides. We used 1-1/4" pocket hole screws (drilling pocket holes on the 3/4" setting) - spacing about ever 6-8".

Step 3

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

Back and front supports are attached to both the sides and the bottom shelf with 3/4" pocket holes and 1-1/4" pocket hole screws.

NOTE: Since these pieces of plywood will be hidden under cabinet and behind finished toekick, we opted to use a cheaper plywood than the prefinished stuff here.

Step 4

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

We cut our top supports from the leftover scrap from ripping plywood down to the side/shelf width (22-1/4"). This ended up being about 3-1/2" wide. Depending on the type of drawer slides you are using (we used Metabox drawer slides that mount to the top of the drawer so not a problem for us) you may wish to place extra support for mounting the drawer slides to the back or a larger back piece.

Step 5

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

We cut our backs to 32" heights because it saves a ton of plywood - and the back isn't really necessary - just finishes out the inside of the shelf. We nailed our backs on with 3/4" finish nails and glue.

Step 6

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

We built our face frames seperately on a clean table, clamping each joint. Then we attached the face frame (after painting it) to the front of the cabinet through the pocket holes drilled in the outsides of the sides and the top.

We did have to glue and nail the bottom of the face frame, as it is too tight to fit a drill in there to attach at the base.

Step 7

21" Base Cabinet Door/Drawer Combo (Momplex White Kitchen)

These cabinets would also work with partial overlay hinges, but we opted for full overlay doors. These are the door and drawer sizes we ordered for full overaly doors. We used 1-1/4" overlay hinges (concealed euro style - more on this later) for hinges.

Finishing Instructions

Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
clips

Shelf?

When does the shelf get installed?

posted by Tsu Dho Nimh | on Wed, 2013-11-27 19:58
clips

Beautiful Cabinets!

I love getting all your details on how to do cabinets the right way! Having that full shelf for the top is a great use of limited cabinet space. I wonder why most ready made cabinets just have that shallow little back shelf for the top? It's really hard to get to, and you can't put much on it.. I like these so much better! Having the door sizes for the full overlay is great too. It's brilliant that you designed these so the drawer face can be done with a 1x6. It saves work not having to rip down boards, and saves tons of $$ when you DIY a drawer front! Thank you for sharing these wonderful plans! I'm saving all of them, because now I want to build new custom cabinets in our house. Happy Thanksgiving to you and your family!

posted by JoanneS | on Thu, 2013-11-28 10:02

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Special Thanks

If you appreciate the free content of this site, please thank our sponsors.


   

Recent comments

Social

Let's Connect

Tweets

  •  

User login

Not Much >>

What's going on up here in Alaska.

Momplex Cam >>

Momplex Cam >>

We are DIYing our moms a Duplex in Alaska! Check out our progress so far as we owner build a home, step by step. Read the Momplex blog here.

Momplex Vanilla Kitchen Plans and How-Tos


Check out how we DIYed a full kitchen here!

Momplex
Momplex
Momplex
Project Plan
Momplex
Project Plan
Project Plan
Momplex
Project Plan
Project Plan
Project Plan
Momplex
Momplex
Project Plan
Project Plan
Momplex
Project Plan
Project Plan
Momplex
Momplex
Momplex
Momplex
Project Plan
Momplex
Video
Momplex
Momplex
Momplex
Project Plan
Momplex
Momplex
Project Plan
Momplex
Momplex
Project Plan
Project Plan