3" Think End Table

Primary tabs

PDF versionPDF version

Additional Photos

Dimensions: 
24H x 27L x 22W

2 - 2x6x8
2 - 2x4x8

Common Materials: 
2 1/2 inch pocket hole screws
wood glue
wood filler
wood conditioner
paint brush
Tools: 
measuring tape
square
pencil
hammer
safety glasses
hearing protection
drill
circular saw
table saw
sander
countersink drill bit
Kreg Jig: 
0
Cut List: 

8 - 2 x 6 @ 27" (Table Top)
4 - 2 x 4 @21" (legs)
2 - 2 x 2 @ 17 (Long Rails (I cut down 2x4 to 2x2)
2 - 2 x 2 @16 (side rail)
2 - 2x4 @16" (Bottom cross supports)

Project Type: 
Skill Level: 
Estimated Cost: 
Style: 
General Instructions: 

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Summary: 

Saw the Griffen Line of furniture at pottery barn and liked it not the price, so here is piece 1 the end table, planning on making the coffee table, and dining table next. :0)

Finishing Instructions

Preparation Instructions: 
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

Comments

Hey there... Cute table! I do not see any directions, though... just the cut list and something saying to follow all directions carefully. Where might i find the set of actual instructions?

Thanks!

Hey there... Cute table! I do not see any directions, though... just the cut list and something saying to follow all directions carefully. Where might i find the set of actual instructions?

Thanks!

Just like the above poster I am desperate for the rest if the instructions for the "Think End Table" project. First and last are there but nothing in between.
Help!

GrammyC

Just like the above poster I am desperate for the rest if the instructions for the "Think End Table" project. First and last are there but nothing in between.
Help!

GrammyC

Pages

HANDMADE FROM THIS PLAN >>

Projects built from this plan. Thank you for submitting brag posts, it's appreciated by all!

Pages