Taylors Coffee Table

diy coffee table with wheels
Difficulty
Intermediate
| Print this plan

Build your own coffee table with free plans from Ana-White.com

This beautiful coffee table features a solid wood design - so you can paint or stain it any color!  With room for baskets and optional casters, this coffee table is functional too! 

Related: Build the Matching Console Table

diy coffee table with wheels
diy coffee table with wheels

 

Photos and Build Credit: Whitney from Shanty2Chic 

This is such a fun and easy build guys!  I used my Kreg Jig and Ryobi toolsto build the whole thing in under 3 hours.   I love how beefy and rustic it looks!  The cost for all my wood and wheels was right at $100… Sure beats the $700 Pottery Barn is asking for theirs ;-) 

Related Plans

Love this project?  Build the matching console table for behind the sofa, in an entryway, under the tv, or anywhere you need a surface with some storage!

free console table plans farmhouse style ana white

 

Notice the beautiful bookshelf?  That's DIY too! Free plans for the this bookshelf are here.

open frame bookshelf pottery barn wood

 

 

 

Dimensions
diy coffee table plans

Preparation

Shopping List
  • 1 - 4x4 @ 6 feet long
  • 1 - 1x3 @ 12 feet long
  • 3 - 2x2 @ 8 feet long
  • 1 - 2x4 @ 8 feet long
  • 2 - 2x6 @ 9' stud length or 10 feet
  • 1 - 1/2" thick plywood panel @ 24" x 48" (quarter sheet)
  • 2 -1/2" pocket hole screws and 1-1/4" pocket hole screws (if you kept the 1x3s)
  • 1" or longer brad nails (for nailing bottom shelf plywood down)
  • 4 - caster wheels and screws to attach (if not included)
Cut List

NOTE: Instead of 1x3s, Whitney used 2x3s which does not affect the plan (actually makes it stronger) but many of you cannot source 2x3s locally. If you do make this change, you will need to measure and cut a few boards that tie in to the 1x3s (step 2).

  • 4 - 4x4 @ 13-1/2" (legs)
  • 2 - 1x3 @ 17" (short aprons)
  • 2 - 1x3 @ 41" (long aprons)
  • 2 - 2x2 @ 21-1/2"
  • 1 - 2x4 @ 21-1/2"
  • 2 - 2x2 @ 41"
  • 2 - 2x4 @ 8-1/2"
  • 1 - 1/2" plywood @ 48" x 24"
  • 2 - 2x2 @ 17"
  • 1 - 2x4 @ 20" Tabletop
  • 4 - 2x6 @ 50"
  • 2 - 2x2 @ 50"
Tools
Tape Measure
Speed Square
Pencil
Safety Glasses
Kreg Jig
Drill
Circular Saw
Miter Saw
Brad Nailer
Power Sander
General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Instructions

Step 1

Attach 1x3s (or 2x3s if you are using) to the four legs. For 1x boards, use 3/4" pocket holes and 1-1/4" pocket hole screws. For 2x boards, use 1-1/2" pocket holes and 2-1/2" pocket hole screws to attach.

Step 2

Attach bottom supports - this will support the bottom shelf plywood. Best way is pocket hole screws - if you are screwing into 1x boards (used 1x3s for sides) use 3/4" setting on pocket hole jig and 1-1/4" pocket holes.

If you use 3/4" plywood for the bottom you don't need the 2x2 supports.

Step 3

Build these "T" pieces first, then attach to the legs and bottom.

Step 4

Notch out with a jigsaw the bottom shelf and attach to the bottom with finish nails and glue.

Step 5

Step 6

Instead of the 2x4 down the center as pictured, Whitney liked using 2 - 2x2s spaced between the 2x6s to make it look more balanced - and I'd have to agree.

Build the tabletop first with 1-1/2" pocket holes and 2-1/2" pocket hole screws and wood glue. Then attach to base with through aprons and center undermount support with 2-1/2" screws (you can use pocket hole screws so you don't have to go out and buy special screws just for this step).

Step 7

Attach caster wheels to bottom of the legs.

Step 8

For finishing details - please visit Shanty2Chic

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

Comments

AndyH

Thu, 02/20/2014 - 12:13

Love these plans that use 4 by 4s for the legs but I cannot find anywhere that sells them untreated and Lowes and Home Depot both tell me they cannot order them.

Where can they be sourced from?

Thanks!

DIYER_MD

Thu, 02/20/2014 - 14:31

The 4 x 4's can be purchased at Lowes. I have purchased untreated 4 x 4's there many times. Look for the Douglas-Fir type. Here is a link to their website with the 4 x 4's.

Lowes 4 x 4

carongirls

Fri, 02/21/2014 - 08:54

No, not all Lowes sell 4x4's untreated. I have gone as far as 4 hours away to check different Lowes or Home Depot. Just not available in my area at all.