This reclaimed console was not build from one of Ana's plan but I did want to share it to inspire others to work with reclaimed wood. I used reclaimed pallet wood for this build, except for the drawer, I used MDF. For the finish I used an oil based poly.
Estimated Cost
$0.00
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner
Comments
Ana White Admin
Tue, 04/07/2015 - 09:31
Stunning!
Just beautiful as always, thanks for sharing!
tracygator
Wed, 04/08/2015 - 13:54
Love it!
This is awesome! I have wanted to make a coffee table similar to this and was inspired by west elm Emerson collection. Can I ask how you cut your boards so the top and sides meet seamlessly? Thank you!
In reply to Love it! by tracygator
timberandsoul
Wed, 04/08/2015 - 15:43
Hi Tracy. Everywhere there
Hi Tracy. Everywhere there is a joint or seam, I cut each reclaimed plank on a 45 degree angle to hide the exposed raw wood after being cut.
tracygator
Wed, 04/08/2015 - 19:38
Thank you!
It looks just like west elm. Did you lay the boards on plywood first? It looks like there are a few pieces per row on the side if that makes sense. Seriously I love this
In reply to Thank you! by tracygator
timberandsoul
Wed, 04/08/2015 - 21:11
You are correct, I build a
You are correct, I build a plywood box basically with a face frame. I rip down all the reclaimed pallet to 1/2" thickness and then nail it to the plywood. The pallet wood is basically a veneer.
dthomas
Sat, 07/30/2016 - 16:51
plans
Do you have any building plans for the pieces you make? I'm a beginner to intermediate in my skill level and sometimes need specific instructions. I really liked your one drawer console and your reclaimed unique TV stand.
Thanks