Interior Wood Rack

My brother just bought house and has a large living room with a large fireplace. He needed something that would hold firewood and also was decorative. We came up with this plan after I built the Grandy Sliding Door Console. Instead of putting in shelves or doors, we put a bottom on and a back on and add the x (2x4's) in the center. We didn't know what to expect, but after finishing it and delivering it to his house, it turned out great.

Built from Plan(s)

Grandy Barn Door Console

Estimated Cost

$75-$100. Depending on what paint/screws you have on hand. If you have to buy all paint, stain, and screws, probably closer to $100. The back we used leftover ply wood from the Grandy sliding door console.

Estimated Time Investment

Weekend Project (10-20 Hours)

Finish Used

Minwax, dark walknut for the top. Then 3 coats of poly. The base is a white paint, distressed with a small amount of dark walnut stain. The base was sealed with Minwax Polycrylic.

Recommended Skill Level

Beginner

Comments

Ana White Admin

Sat, 02/06/2016 - 10:01

Great!

Perfect solution to inside wood storage!

Paulodbe323

Sat, 02/06/2016 - 20:49

Thanks!

Thanks for the comment. I have made many other projects from this site. I need to upload them all soon.

Taylorfoltz2

Mon, 04/25/2016 - 07:36

Do you have a full DIY plan

Do you have a full DIY plan for this project? Thank you!

Paulodbe323

Mon, 05/30/2016 - 00:02

I do not have the full plans

I do not have the full plans exactly. I originally built the grandy sliding media console from this site. Then I got the idea to make this firewood holder with the same concept. The only thing I did different was I didn't add any shelving inside except the very bottom shelf, and I didn't add any doors. I just used 2x4s in the center for the x's. Sorry for the late response. Hope this helps.