This was a great first project. Thanks for the plans and the inspiration.
I needed to make a hall table so made a narrower version, and had to alter the dimensions to suit the metric system and readily available materials at Bunnings (Australia), and also made the upper and lower sections identical in height. It ended up about 300mm deep because the shortest drawer runners I could find were 250mm. These are full extension Hafele side rails, opening 100% to make the most of the narrow depth.
The drawer fronts are from a single piece of reclaimed Oregon Pine sourced locally and then stained with various strengths of Victorian Antique Wood Dye from eBay. The stain is natural/non-chemical and made from walnut husks - just dilute with water to the desired shade and worked well on this timber.
Thanks Ana and thanks Jamison!
