My kids needed a step stool and I had some scrap wood (2x10) left over from a previous project
Built from Plan(s)
Estimated Cost
20 dollars
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax (weathered oak stain)
Minwax polycrylic protective finish
Minwax polycrylic protective finish
Recommended Skill Level
Starter Project
Comments
kristyzed
Wed, 08/17/2016 - 20:40
Nice!
These are great. Can you share dimensions and if there are any angle cuts on the legs?
msyoung22
Thu, 08/18/2016 - 20:12
Thank you! The dimensions are
Thank you! The dimensions are the same as the Ana White "Simple 1x10 Single Step Stool" except I used 2x10's instead of 1x10's like the plans called for. I also used some scrap pallet wood to make a design on the top of the stool.
- Stool height: 7 1/2" for legs, 1 1/2" for top, and 1/2" for scrap pallet wood; which gives a total height of 9"
- Stool width: 9 1/4" x 16"
- 5 degree angle cuts were made on the legs
mamasue72
Wed, 04/17/2024 - 09:21
Are the rails a 2x10 cut in…
Are the rails a 2x10 cut in half.? Or is it pallet wood?