Simple pine farmhouse table, top is 2x6 Pine cut down to 5" wide strips top was joined with pocket screws and glue
Base is 4x4 pine joined with lag bolts
Longest part of the buld was sanding the top smooth, special care was needed in measurig the notches to fix the X-Brace legs
Tools: Drill, Table Saw, Circular Saw, 1/2 socket drive
Estimated Cost
$150 all in for wood, bolts, screws and stain
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
minwax espresso and poly clear
Recommended Skill Level
Beginner