I added metal corners made by bending 1 1/4 x 1/8 inch flat bar and attached with 1/4 x 1 inch lag bolts
Hello,
I had some downtime at my furniture business, so I built this to sell. It's just a basic bench with base board. People in southeast GA are loving this piece!!
Well, I had just bought a house. We had no furniture for our sunroom, so I took it upon myself to build some while materials were still cheap.
Hindsight, the chairs rear end should have been a level seat instead of trying to build an Adirondack style club chair. I modified the ends to match the modern style so they would match the chairs.
The sofa turned out great, all are solid and built with pocket screws. Sealed with redwood deck sealer, should last forever!
For the covers, we had them made from covers and all, and went to the local Joann and bought 4" thick foam.and wrapped it with with polyfill. Can't tell that they were made in a backyard, but they've been great for 18 months so far!
Custom tower shelves with hanging space and four shelves.
My husband was thrilled to build us a new bed - it meant he got to buy a Kreg Jig. Of course, he refused to buy plain ol' pine off the shelf at the Big Box stores and just HAD to buy the solid red oak from our local lumber yard. (So much for keeping the costs low. Oh well.) It's stunning and I love it. If it weren't for Ana's plans for this, we'd be settling for some hunk of junk off Craigslist or, worse, one of those furniture chains. For still roughly half the cost of something out of a store, this is a far superior bed frame and will last forever.
My hubby's no stranger to using power tools, but this still took him a few weekends due to life and letting the stain/finish set. He still has to attach the quarter-round, which he broke out the router to customize himself, but I was super impatient and told him to finish the base and put the trim on later. I'll try to remember to update this when that happens.
He also found the Queen Anne style legs off http://www.osbornewood.com/
My wife and I need a big dresser for the new addition to our home. So instead of a media console we turned this into a dresser.
Tue, 04/07/2015 - 20:37
Beautiful job!!! I am currently in the process of building the triple printers console as well. I love you choice of drawer pulls. I may have to reconsider my selection ;)
Chairs turned out nicely! Adjusted for cushions from home Depot (24x24)
Will also make a little table to set between soon. Thanks for the plans.
Enjoyed making these Christmas gifts
I've officially stopped stalking and started building! First project a modified spa bench. Still have to stain it, but it already makes the big pile of shoes by the door look neater! I'm a hands-on person and not afraid of power tools (got a band saw for my birthday!) but it's still a challenge building a piece of furniture. I've already learned lots of do's and don't do's for next time!
Thanx a bunch for your site, Ana! It definitely gets the mind plotting great projects to come!
I built this A-Frame Chicken Coop using the Ana White plans. It turned out adorable, strong, and I am very pleased. Final cost was $250, and it took me 4 days (in real time, as a mom of 3). One Saturday at Lowes shopping, one Sunday afternoon cutting, and two days of assembly. Then a 5th for painting. Give or take a dozen extra runs to the hardware store! My brother-in-law helped cut the angles on his miter saw, and my uncle helped with assembly. I kinda doubt this could be done for $100 - maybe if you have a bunch of scrap materials and spare paint. We even have 7 or 8 hens in there! I only intended 3 to live in it, but my uncle added the extras and they all get along happily. I found the roof cap at Home Depot (didn't find at Lowes).
I would also like to point out that I was very afraid to do carpentry - I was afraid to even buy the lumber. But I asked for a lot of help from a lot of Lowe's and Home Depot people, and resisted the naysayers, and just got brave and did it. And it came out beautifully! If you are new to using power tools, get someone to assist, and you would need help anyway with holding things up while another drills.
Wed, 05/22/2013 - 11:59
As an extra note, I used Hardware cloth, not chicken wire. Wire will not keep dogs or predators out (and my dog immediately tried but failed to claw his way in). I bought I believe 36 inch tall rolls - the standard size that I could tell (not 30 inches like in the plans). But it fit perfectly, so I think maybe the plans had a typo? Lay out the lumber according to the plans and it will fit perfectly.
Wed, 05/22/2013 - 21:33
Very nice! Hardware cloth is definitely the way to go.
In the middle of my TV stand project my wife INSISTED we needed a stepstool for our 4(almost 5 and not the 11 month old in picture lol) year old. Only took maybe half a day to build and stain. Mainly due to the detailed step by step plans from this site. TY Ana!
I started off building the loft bed. It was a lot of fun. I cut every single piece of this, and hand everything, other than the white sox and players decals. I made the light up pinwheel signs that light up whenever the white sox hit a home run. I had fond memories of the famous scoreboard going to games at the old comiskey park, and my 5 year old son loves the white sox, and this bed! There is a door as well that opens up and goes into the locker room. Underneath there is a rv, with a chair, and some other cool amenities good enough for a real major league player. I won’t tell the secret of how I designed the pinwheel light boxes, and the led lights. I had to get realllly creative. This was a huge project that completely consumed me for months. I love it though, and wanted to thank Ana for the great plans on the loft style bed! Thank you Ana white!!! Your the best
I changed this plan and made it into Full size. Feel free to contact me if you would like more information about how to do this too.
This is my first Ana-White build and I love it so much! I used a 100 year old door for the back and antique knobs for the hooks. I plan on making a farm house table next :)
First project I tried from here. Not too bad. I have a Cordless miter saw (Ryobi)
Wed, 04/15/2015 - 15:48
This looks great. This is on my todo list as well for holding my small gas grill. :)
I used Ana's queen size bed plan with a few variations. I used my local red cedar and white spruce rough cut lumber scraps and lots of sandpaper. Rough cut lumber has differnt deminsions and it made for a very rustic sturdy bed with nice contrasting colors thoughour the projec. I love my new bed.
This was my first build ever. I loved the storage lego table, but it wouldn’t work well in our long, narrow living room so I decided to make them end tables instead. I also changed them so that the tops were hinged to the back. I love the way they turned out! Now on to the long list of other things I want to build from this site. Thanks so much Ana!
Build Instructions;
http://www.instructables.com/id/Rain-Barrel-Stand-and-Installation/
Video of Build:
Comments
Ana White
Mon, 04/06/2015 - 16:28
Beautiful!
Beautiful!