Community Brag Posts

The sofa was my first large DIY project that required a fair amount of construction. It took me about a week working a few hours a day. I followed the plans as they were listed but made a few adjustments to accommodate for the size of the cushions. I used regular pine and then cheap lumber for the slats, lesson learned. Way too much sanding and it still didn't have the finish I was hoping for.  

For the chairs: I used a mix of plans from the Bristol outdoor lounge chair (Ana's) and the simple outdoor sofa. I chose to use all sect pine for the chairs, after the hard time I had with the cheaper wood I chose to use on the sofa.  I was much happier with the end result.  I used 1x3's mostly and then added 1x1 composite molding as an accent around the base.

I looked long and hard for cushions before I started the project based on the recommendations from others. I took me a while but I finally found Somewhat affordable outdoor sunbrella cushions at Lowes. These are the Allen + Roth deep seating sunbrella cushions, which I highly recommend. They are very comfortable and dry quickly after it rains.

We used the Fancy X Farmhouse Table plans to create the table then stenciled the game boards onto the sanded tabletop with a pencil.  After that we scored over the pencil tracing to prevent stain bleed over, then carefully polyurethaned over the sections we did not want stained.  After the poly dried we used a small craft brush to paint the stain in one color at a time.

Took roughly 15hrs and $500... We bought the top at Lowes for $150 on sale (Acacia), because it turns out butcher block counter tops of this size (considered an "Island" top) are like $500 and I don't know who can afford those shenanigans but certainly not us. Interesting point: in as much as I totally appreciate the design (Thank You Ana!) the instructions are mostly beautiful but have a few key areas with room for improvement. If you are thinking of building this take some time to go over all the materials and really map out the project. I purchased everything in 8' lengths as per the shopping list, I realized afterwards that because my unit is only 5' long I now have many 3' cut-offs.... had I purhased 10' lengths, you see where I'm going with this yes? I would have paid more per board but had less leftovers. I think I also have a package of unopened screws and an extra board from the shopping list, no big deal, it's like the 10 hot dogs for an 8 pack of buns conundrum, I've now entered an infinite loop. I also realized too late that to use the pocket hole screws to secure the counter top I would need to drill the holes (using my handy dandy Kreg Jig) before putting the slats on the top shelf or else I couldn't get my drill in, rookie move I know...You may find, as I learned, Lowes/Home Depot do not carry such things as 4x4s that are not pressure treated and therefore not ideal to have in one's kitchen...I ended up purchasing all the lumber at an actual lumberyard (Peacock Lumber, Oshawa, Canada), which was cool, because now I know where that place is, and it smells nice. Have fun with your build. I tried to post some other pictures but they kept coming up sideways, story of my life. Take a look on Facebook if you want Adam Connor in Pickering, Canada, I'm not shy ;-)

My first furniture project was Ana's Tryde Coffee Table. All along though, the goal was to learn enough to be able to make a dining room table. I love the coffee table, and I love Ana's Farmhouse table plans, but I was worried about getting food and stuff stuck in between the table top boards.

So I decided to embark on the adventure of learning how to make a solid table top that I could rest on top of Ana's base design. The result is below, and although it took about 6 months of learning, practicing, and prototyping, I am finally done!

Because I made a solid top, I was able to skip the support beams on the base, which hopefully reduced the weight a little bit.

I don't have a blog, but I added some additional comments in my Picasa Album.

Thank you for these plans - they were great for a first time build. Definitley learned a lot building this...and now on to the next project!

I saw the plans for the narrow farmhouse table and had.to.have.it! I showed my husband and he liked it but wanted turned legs. This was the compromise. I'm so happy with how it turned out!

Made a couple modifications:

• Used 4x4 for the cross beams instead of 2x4. 
• Used 4x4 anywhere there were (2) 2x4s together. 
• Used a dowel jig to attach the (4) 45 degree pieces on each post
• Sanded down the table top until the seams disappeared.  Thank you, belt sander!

That last bullet was super-important to the Mrs.  She was adamant that the table should not have spaces in between the boards, yet she did not want any seams for crumbs to collect.  The result was that I had to sand down the table top about an eighth of an inch... but the seams disappeared.

Also, we initially used Ebony stain... until we realized it was too dark.  Sanded that down a bit, then went over top with the Kona stain.  Result was a dark brown with some black detailing.  Finished with some minwax wipe-on poly.  Turned out really nice!

Thank you, Ana - This project was a ton of fun, challenging, and ultimately, very rewarding!

I found the Christmas tree shelf plans and since I had drawn my wife's aunt's name for this year I knew she'd appreciate this build.  I chose 1x6 top choice pine and a wider piece for the base since she may decide to set this on the floor instead of hanging it.  I also had some oak plywood I used for the back.  I screwed all the pieces together, countersunk and filled the screw holes with wood putty.  The paint I used was Benjamin Moore, the color was Balsam (567) and I really like how the color came out.  I painted the back and the bottom with standard black interior paint just to protect the wood a little.  I coated it with a couple of coats polycrylic and bought a couple of Christmassy items for the shelf to get her started.  Can't wait to see what she thinks on Christmas day.

This can easily be built in less than a weekend depending on your skill level.  I had to recut one of the boards when I caused some damage while putting it all together.  The sanding, painting and finishing takes as long as you want depending on the finish and care taken.

Norwegian version.

Wood sizes in millimeters:
Can be bought from Byggmax, Monter or Coop Obs bygg for example.
36x48mm
48x98mm
48x148mm

Lessons learned: Dont buy cheap tools and make sure the wood is straight.

I built my new sofa!
I am so happy how it turned out. I had to translate all the instuctions in french, and modify the dimensions to adapt them to the lumbers I found in my country (France)
I had to change inches in centimeters too.
It was just a little difficult but I built it!!!
Thank you so much Ana, I am one of your fan.

I seen the plans for a coffee table made out of pallets submitted by Aud builder and just had to try it. The company where I work has tons of pallets so it really didn't cost me anything. I added an additional pallet and left the casters off. In place of the casters I put 4, 4" 4x4's at the corners and then used 1x4 at each of the corners to connect the whole thing. Then I did the white wash on it. I loved the color and had a lot of fun putting it together.

My very first woodworking project. Had to convert all plans to metric units and adapt to available wood stocks in Bucharest. If you want details, don't hesitate to contact me.