Community Brag Posts

A piece of Palouse/Moscow/North Idaho History!

Hand-crafted by father and son from reclaimed materials native to the region, this is a one-of-kind piece of furniture of both substance and significance.  The stock was sourced from the railroad depot that stood on the University of Idaho campus in Moscow for well over 100 years.  The crops, forest products, and people of the Palouse passed through its doors and across its floors from the early days of westward expansion and settlement.  Marked for demolition in 2017, the depot yielded lumber that had been harvested from old growth forests native to our region since time immemorial.  The trees that produced the lumber-turned-dept-turned-halltree stood tall, proud, and mature at the time of the signing of the Declaration of Independence.

The halltree’s back panel and trim are crafted from the depot’s tongue and groove flooring, and still bear the marks of their original milling.  The remainder of the piece is constructed from the ceiling planks.  Twice painted during the course of the depot’s sentinel watch over the commerce and culture of our region, the cream surface coat is yielding to the forest green base layer, giving the finish a depth and patina that testify to its age.  The history of the Palouse literally passed over, under, and between every square inch of wood in this halltree!  It now stands ready to serve a family for generations to come while reminding them of our pioneer past.

Dimensions:  39” x 15-1/2” x 78-1/2”

I have built this console quite a few times. Always trying different finishes. Love all of them. Have to say I always skip the X on the sides, I just get lazy towards the end :) Im in the process of building a couple more, will try to add the X to it this time...we will see :)

This was the first attempt at using the vaseline method to distress furniture and my wife loves it.  I made the table top out of scrap 2x4's.

As Ana mentioned in her video, this project could be made with scraps. That’s just what I used.  I used a lot of scraps and cut offs for this project.

I needed to make a K cup holder but also space to hold tea in addition to other coffee "toppings" if you well. In the pictures you can see mini creamers.

This modification was made by adding a small drawer in addition to the holes that would hold the K cups. The small drawer was made with 1/2” plywood (even more scraps) ripped just shy of 1-1/2”. I did this to make sure we did not see the plys of the drawer as I planned to add 1/4” plywood to the top all around. I wanted this to make it all uniform with the K cup area. 

I added little rubber feet’s to the bottom as this will be on a granite countertop which could results in slipping and sliding. 

We let my son choose whether he wanted a modern store bought play market or whether he wanted help Mommy and Padre (my dad) build one for his 3rd birthday present. We used magnetic primer so he can change the name whenever he wants and added some trim and some tea towel curtains! He loves it!

My spin on the rustic table. Used staircase spindles for legs, cut the side boards to accommodate. Rest of plan was pretty much the same. Wife wanted a big table, thats what she got.

I loved the country gray paint, so stayed with that. But my bed is one of the farmhouse beds and needed it to be a little taller. It turned out beautiful and have already made a second to match! 

Pine box with walnut top and drawer faces. Behr paint on the box and tung oil finish on the walnut. 

I had been eying the IKEA Expedit 4-cube bookcase and figured I could build it for cheaper and have lots of leftover plywood for some other projects. I was right!

I built this shelf for my mudroom. I modified this plan to fit my space, it is 36 inches wide. I also used 3 - 1x3" pine boards for the top. Love this plan so much that I've made two more to give away as gifts!

I built the beauty storage cabinet with sliding mirror door from Ana White's website.

Queen bed with shim head and foot boards

I made a few changes to the Farmhouse Bench plans as I wanted to match the design of the table. Most notably, I lengthened the seat boards to replace the breadboard end caps. This made my total length 67″, the perfect size to fit under the table if needed. The width was changed to 15″ and the height remained 18″.

We haven't had bed frame since we moved from Florida and as we now have our own home, it was time to get one. My friend gave me headboard they had no use, so I just had to build rest of a frame.
Notice that we are middle of the hole house renovation so we have no trims, walls are lacking paint etc :) I still need to make night stands and closet for us :) Let see how they come out.

Follow our projects and life middle of the mountains in my blog :)

http://ourleaningtree.wordpress.com/diy/bed-frame/

Followed the plans for the Easy monogram snowflake, painted it with pewter gray, and added a set of battery powered led lights to the back.  Thanks for the plans Ana fun build and now everyone wants one. 

I fell in love with Ana's plan for this vintage step stool. I made three, but one has already gone to a new home (my sister's house). I used all scraps, I didn't have 1x8 for the treads, so I slatted two 1x4s. Then behind my husbands pile of scrap wood in the shop I found two planks of 1x8 oak!!!! I made the second two stools with the oak for the tread, but didn't want to cover it with paint, so I stained the top treads. This also was my first build using a kreg jig, I borrowed my sister's 'kreg jig jr.' It made the assembly so simple and quick! These have been so nice to have around the house for the kids washing and brushing and helping in the kitchen!

I loved the original one posted and it inspired me to create our own version. It's getting great reviews !

This project was made from Ana White's apothecary media console plan. The finish is Minwax Special Walnut on the drawers and top. On the sides is a finish technique I found on thehouseofsmiths.com - Faux Barn Wood Painting Tutorial.

Anna White Beam Table with Benches 

This was a fun build. I used the HD Kreg Jig for the 4x4 beams and a standard Kreg Jig for the table. The bases were done with a white wash finish and the tops done with a few different stains to give it more of a barn look