Tryde Console Table

Submitted by Lee8717 on Mon, 01/09/2012 - 17:54

Tryde Console Table. First project undertaken. Decided to make a bottom shelf. Used 4 1x4s and notched the middle two to fit around legs. Being that is was out first project, we had a few problems with keeping everything square and level but with a few minor tweeks it ended up looking really good.

Built from Plan(s)
Estimated Cost
$70
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Semi gloss black. Before painting took sander and sanded the sharp corners off all boards making them rounded and distressed looking. After painting two coats, took 220 grit sandpaper to the edges to take off some paint to expose the wood underneath.
Recommended Skill Level
Beginner

Comments