Moulding Mantel headboard variation

This was my very first building project and I'm officially addicted! I made the headboard as a surprise for my husband while he was in Africa. I used a variation of moulding and am tickled by the outcome! I adjusted the plans to fit a king-sized bed.

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Black paint with a light coat of polyurethane to finish.
Recommended Skill Level
Beginner

Comments

JoanneS

Sat, 10/20/2012 - 13:13

Wow, this is so beautiful! You did an absolutely amazing job on this! Congratulations on a fab first project, it is prettier than any headboard I've seen in a store. :)
Joanne

5 tator tots (not verified)

Tue, 10/23/2012 - 19:09

I have so much trouble getting a smooth painted finish, always have brush or roller marks even with quality paint and paint conditioner. How did you paint your beautiful headboard?

In reply to by 5 tator tots (not verified)

bethhamstra

Fri, 10/26/2012 - 20:01

Thanks for the compliment. I did a light sand between coats and then finished with a very light coat of polyurethane. I hope that helps a bit!

Sabrina426

Sun, 03/24/2013 - 13:34

You did an unbelievable job! I'm planning on this for my first project.

Do you have the dimensions you used for the king size??

bethhamstra

Wed, 02/26/2014 - 19:07

I'm sorry I didn't keep the dimensions on the cut list. Basically you just need to add 16" to every piece that will run the length of your headboard. A standard queen bed is 60" wide whereas a standard king is 76". Hope this helps!

bethhamstra

Thu, 02/27/2014 - 13:45

2 – 2x6 @ 59 ¼”
2 – 2x6 @ 70"
2 – 2x2 @ 8 ½”
1 – 2x2 @ 84"
1 – 2x6 @ 84"
2 – 2x4 @ 3”
1 – 2x4 @ 87"
1 – 1x6 @ 89"
1 – ¼” plywood @ 72" x 22 ¾”

Margery

Sun, 10/05/2014 - 18:30

oh my gosh...this is so beautiful!  I want one just like it!  I just might attempt it after I make my faux fireplace mantel :D

GREAT JOB!!!