Fancy Farmhouse Double Pedestal Table

Submitted by carrmatt02 on Wed, 05/01/2013 - 20:02

This is a combination and a scaled down version of a couple different farmhouse table plans. It is 60"x43" to fit our dining room. I integrated an inlay looking piece into the top with a 1x2 and mitered the corners of the outer two layers. The thickness at the edge of the table was accomplished with 1x4's with the middle layer inset by 1/2"... chairs to match are in the process of being built.

Estimated Cost
$175
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Dark Walnut and Ebony for the inlay with six coats of Minwax Wipe-on Poly.
Recommended Skill Level
Intermediate

Comments