Easy to make wood gallery wall frames from 1x2 furring strips.
This plan can be easily modified to fit any size
1 - 1x2 @ 5 feet long
2 - 1x2 @ 8" (cut to width of mat)
2 - 1x2 @ 10" (cut to length of mat)
2 - 1x2 @ 9-1/2" (cut to width of mat PLUS 1-1/2" - measure and cut to fit is recommended)
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.