A rolling cart featuring a angled top book shelf perfect for keeping books in place, and a large bottom shelf perfect for baskets or bins. Sized for children.
I feel selfish posting this one. I've got a mile long "short" list of most requested projects that I'm bound and determined to take on. Corner cupboard, check. Z Tower, check. Next up, kitchen helper, farmhouse table matching bench, upholstered bed, dining banquette, stunning shelving that Beth just suggested . . . just to name a few. And I'm quite excited to take on all these projects too!
But when Christy suggested this library cart, I HAD to have it for ME. Yes ME. Me as in ME ME ME!!! I want! Because I'm the only one in our home that cares if books are piled on the floor or not. In my defense, I do vacuum around them, stack them, dig through them for a certain princess book that looks exactly like the other twenty three in the set. And I do move them from room to room on a regular basis. So yes, I wanted this Library Cart for me.
To hold Grace's books of course.
I did make some modifications from Land of Nod's version, mostly in that I used 1x12s for the box instead of 1x16s, making the shelves narrower (good for turning corners and going down halls - and my most favorite, sliding into closets), but I reasoned that most kids books are smallish, and the larger books could be displayed flat (as the Princess book is done above). And 1x12s are cheaper, easier to cut, and more readily available. I also increased the length because any way that I could figure, this piece had to be cut from a ten foot long 1x12. Might as well use the whole thing up.
The mods were definitely a good choice. The scalloped boxes came from Home Depot (by the way, thank you Home Depot for sponsoring our site and keeping plans free! Please pay them a visit for their support) and fit perfectly on the bottom shelf. The letters were from Joanns, I just bought one of those 100 packs of random letters for two bucks.
Here is a quick photo I took after building to check the fit of the books. The Library Book Cart fits a TON of books! I used the bins to hold the smaller books, placed 8 1/2" x 11" books on the bottom shelf - including all the coloring books and workbooks, and then mid sized and larger books up top. The top shelf is perfect for Grace to sort her own books.
1 – 1×12, 10 feet long
1 – 1×2, 6 feet long
1 – 1×4, 3 feet long
1 – 1×8, 3 feet long
2″ Screws OR 1 1/4″ Pocket Hole Screws for a Pocket Hole System
Wood filler, glue and finishing supplies
2 – 1×12 @ 28″ (Sides)
2 – 1×12 @ 31 1/2″ (Shelves)
1 – 1×4 @ 31 1/2″ (Top Shelf Support)
2 – 1×2 @ 31 1/2″ (Bottom Shelf Trim)
1 – 1×8 @ 31 1/2″ Top Back)