You can't tell in the pictures but the frame where the bolts are supposed to be barely touch the legs on the headboard. I have a standard queen bed on a standard queen frame, but it's just a bit too wide to bolt the frame to the headboard. I also had to take about 8 inches off the original plans because of the window the bed is under. Measure, measure, measure.
Get straight wood. The straighter, the better.
I used standard finishing nails and liquid nails glue to hold it. I didn't need to break out the Kreg Jig as the original plan stated.
Built from Plan(s)
Estimated Cost
$40
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
I made my own finish using steel wool in vinegar. This is what took the most time.
Recommended Skill Level
Beginner