Recyle/Waste Cabinet

Submitted by RITWood on Sat, 10/07/2017 - 11:03

Keeping with the cottage farmhouse this is my take on the Wood Tilt Out Trash/Recyle cabinet.  I used construction grade 1x12's.  I would consider this project an intermediate level because I used two 2x12x8 and machined the smaller dimensional material.  I rounded over the faces using a 3/8 inch round over bit in my router.  Multiple coats of sprayed on latex followed by several light coats of water based poly.  

Estimated Cost
$28
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Fireweed red latex with a clear coat of polycrylic. I used a HVLP sprayer to apply the finish. It takes several light coats of the red to cover adequately. Smooth moderate sweeping motions work the best.
Recommended Skill Level
Intermediate