Community Brag Posts

Bens table and chairs

Submitted by Anonymous (not verified) on Sat, 01/18/2020 - 14:19

I took your plan for the Clara table to make Ben's table. I used your sizing but made Ben's table with pedestal legs. I then used your $4 chair plan as well.
Most of the timbers you use we in Australia consider exotic timber.
I used eucalypts. Tasmanian Oak for the table legs and Red Ironbark for the rest.

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Lacquer

Entry table using Cottage Media Table plans

Submitted by KelleighW on Wed, 04/18/2012 - 15:17

I used the Cottage Media coffee table plans and modified the length and height to suit for the space I needed. Ana's plans were super easy to follow and am pleased with the end result.

Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Chocolate Walnut
Recommended Skill Level
Beginner

Antique Armoir

Submitted by George R S on Sat, 02/01/2014 - 19:11

This is the first furniture project I have built from a plan found on-line - at Ana's Website. The plan was very easy to follow and I thoroughly enjoyed building this piece of furniture. I made some alterations to the upper cabinet as per shelving. I used an antique finish to match my bed. The match and design is perfect!

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Behr primer and paint in one. Oil based walnut antique gel. Silver acrylic paint. Water based satin finish varethane.
Recommended Skill Level
Intermediate

Comments

Truss table

Submitted by Anonymous (not verified) on Sat, 04/30/2016 - 17:41

I did modify a bit with the length and width. I also left the supports vertical instead angling them. Love how my table came out!

Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Advanced

Hutch with cabinet

Submitted by wgbeecher on Fri, 01/24/2020 - 09:29

I saw this on Shanty2Chic and loved the plan.  I had a friend that wanted me to build her two of these with tin in the door and back.  The tin was a challenge but it all worked out.  She loves them.  Thank you for the plans.  I could not have done this without them.

Built from Plan(s)
Estimated Cost
150.00 each
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Special Walnut Minwax
PolyWipe
Recommended Skill Level
Advanced

10 dollar ledge

10 dollar ledge with small trim on the bottom (now cost 20 dollars total)

Built from Plan(s)
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Primer and two coats of white paint (with floetrol) applied with paint brush
Recommended Skill Level
Beginner

Crayon holder

Submitted by cookiecrab on Tue, 02/04/2014 - 18:56

Had left over 2x3's so I used those. The kids love them!! Easy to make. Cost $10 due to stickers and paint.

Estimated Cost
$10
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
spray paint
Recommended Skill Level
Starter Project

Storage/Toy Box

Submitted by AndyH on Mon, 05/02/2016 - 19:55

Storage box made from left over 1 by 4 and plywood from recent projects and a top I made for another cabinet but didn't use.  All I bought was two 1 by 4s for the top trim and the hinges.

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
White satin paint and Sherwin Williams Foggy Day gray paint for top.
Recommended Skill Level
Beginner

Mini Beverage Bar - Perfectly sized!

Submitted by Anonymous (not verified) on Fri, 09/22/2023 - 08:02

Couldn’t find a coffee bar to fit my space so I modified the Snack Cabient plans of Ana White's! Looove how it turned out! The barn door hardware was fun!

Laura Thompson

Comments

10 foot long Provence Table with 4x4's

My mom was looking for a new outdoor table, and asked me to come up with something. I found the link for these plans (http://www.thedesignconfidential.com/2011/04/free-diy-furniture-plans-t…) to knock off Restoration Hardware's $4000 Provence Beam outdoor table. Overall I liked the plan, with the chunkier look of the 4x4's. But there were a lot of errors in the diagrams, and the finished height is 34" which is ridiculously tall for a table. So we took it apart and cut the legs back down to change the finished height to 30". We chose rough-cut cedar for it's look and outdoor properties, not wanting to use treated lumber for a dining table. We couldn't find 2x10's like the plan, so we substituted seven 2x6's just like Ana's plan, but left a 1/2" gap in between so water can drain and not pool on top and rot the wood. Also, since we were working with 4x4's for the legs, we chose heavy duty lag bolts instead of screws to join them together. I love the finished look they give. Overall it's a sturdy, yet lightweight table that my mom loves and has already used for entertaining!

Built from Plan(s)
Estimated Cost
$230
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
outdoor sealer
Recommended Skill Level
Advanced

Comments

brookifer86

Wed, 04/25/2012 - 10:02

Thanks Brook! It was so much fun to build. I put my dad and husband to work while I was the "project manager" ;)

End table made from pallets (plans included)

Submitted by mtairymd on Sat, 02/08/2014 - 14:58

Building an outside side table out of scrap pallets.

Video of the build:
https://www.youtube.com/watch?v=kVAYXVGiL_8

Drawing File
https://googledrive.com/host/0B21TbB8gGNQbX2dlNGdxR0NuOE0/end_table.pdf

Estimated Cost
$5 for stain and nails - free pallets
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Red Oak
Recommended Skill Level
Starter Project

Modular Play Kitchen

I made this for my 3 kids for Christmas and I'm so glad I did!  They have gotten so much use out of it and love to move it around to set up different "houses" and restuarants.  Thanks so much for these plans!  I made the pieces a little taller, and use the play stove as the sink base too so that it could double as a dishwasher :)  

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Color Bay by Pantone
Recommended Skill Level
Beginner

Rustic X Coffee Table

Submitted by jmuhorn99 on Tue, 02/04/2020 - 16:22

I'm really bad at making the X's, so I just added some straight pieces for decoration.

Built from Plan(s)
Estimated Cost
$64
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Dark Walnut stain and white chalk paint
Recommended Skill Level
Intermediate

First Project - Farmhouse Storage Bed

Submitted by kmac1036 on Fri, 04/27/2012 - 11:55

Working on getting furniture done for my kids. Gives me something to do when they are away on visitation. New furniture from a store is too expensive right now & gives me something to work on to keep my mind off of things.

Modified to fit a Twin XL mattress.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Passion Pink latex enamel semi-glass from Sherwin Williams. top coat with polyurethane for chip/scratch resistance
Recommended Skill Level
Starter Project

Comments

birdsandsoap

Fri, 04/27/2012 - 13:37

Beautiful job! I love the color. I have memories of being gone for weekends on visits and coming home to a newly decorated "Rainbow Brite" bedroom and my mom assembling a waterbed for me on the kitchen floor (it was the eighties); it felt great to know that my mom was thinking about me while I was gone, your kids will not forget those things.

amercado

Wed, 05/16/2012 - 09:48

Hi!, i am new to all of this and would love to make this bed for my daughter, could you share the measurements for the twin version? thanks!

fortmac (not verified)

Sat, 06/02/2012 - 03:12

Hi, I like this bed for my son, also looking for the measurements for the twin version.Thanks

Nicole 1016

Mon, 08/27/2012 - 11:05

This is gorgeous! I would love to know how wide you made this and if you only had to adjust the headboard and footboard?

grreenbeans

Sun, 01/17/2016 - 09:17

Hi! I know this question has been posted before and replied to but, for some reason, I can't see the replies so... would anyone mind maybe sharing their converted measurements for a twin sized bed? Thank so much! This will be our first project and I'm sooo nervous!

grreenbeans

Sun, 01/17/2016 - 09:17

Hi! I know this question has been posted before and replied to but, for some reason, I can't see the replies so... would anyone mind maybe sharing their converted measurements for a twin sized bed? Thank so much! This will be our first project and I'm sooo nervous!

Firemedic

Fri, 02/05/2016 - 20:20

I made this bed in a twin. The twin mattress is 39x75. That's 21 inches narrower and 5 inches shorter than a queen. So just make the head board, foot board, and slat measurements 21 inches shorter keeping the height the same. The length is five inches shorter but to get three drawer slots the same size I made mine 75 3/4 long. ( 24 1/4 for each drawer slot).

Modified Husky Farmhouse Table

Submitted by Doro.marie on Tue, 02/11/2014 - 04:28

My husband Chris and I have been planning for a few years now to build a farmhouse table for our home. Every year for christmas my mother-in-love (mother in law) gifts us a "must have" tool. We like to think of it as her investing in our home and quality time together. Last year she gave us the Kreg gig, holy cow, that sure is a must have!!! :) This year we received a hand sander. Needless to say we were motivated to start our farmhouse table journey.
We loved the table Ana built for her sister, so we followed the plans almost to a tee. We ordered the turned legs from Georgia. Let me also add that we try to buy everything we possibly can that is made in america, from paintbrushes on. I encourage everyone to take the a few seconds to look and spend an extra dollar or two to support america's economy.

The only modification we did to the plan was add a small strip of wood to the base layer for just a little extra touch of character. :)

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Table top- miniwax wood conditioner, Early American stain, and helmsman spar urethane.

Base- early american stain for base layer, Old Fashion Milk Paint in Buttermilk, and spray on polycrylic.
We live in a small town and were not able to find gel stain anywhere. We could have ordered it online, however we adamant about using our snow days to work on this project. This made a difference as far as how the milk paint chipped on the legs. I had to hand sand to get the rustic look, however it still looks fabulous. :)
Recommended Skill Level
Intermediate

Comments

Herb & Flower Ladder

Submitted by Anonymous (not verified) on Mon, 05/09/2016 - 15:06

Living on a small city plot, this vertical ladder planter was just what I was looking for to grow my herbs and flowers. I am not an experienced builder but the plans were easy to follow. It didn't take me much time at all to complete this project. Now I am looking forward to fresh herbs and flowers all summer.

Recommended Skill Level
Beginner

Comments

Combination Workstation

Submitted by Anonymous (not verified) on Wed, 02/12/2020 - 07:45

Combined a few of your plans to make my wife a Workstation. Plans were easy to follow and there were no dimension errors.

Estimated Cost
200.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Combo semi gloss paint and primer
Recommended Skill Level
Intermediate
Back