Community Brag Posts

I used the farmhouse doll bed as inspiration, and ran with it. Mostly I made it up as I went along- but it's sturdy, and cute. I still need to finalize the cushion, but I'm happy with it overall.

Loved this! It was really easy. Can't wait to build more!

Darling Mud Kitchen by Sarah Jean Gammon

"I had this idea of making Sonny a mud-kitchen, a kids play kitchen for the yard. I mentioned it to Brent and he laughed saying he had enough projects on his list. This was not something he was going to build. Sooo I built this all by my self...or as Sonny would say, “me do this my own self”. It cost ~30 bucks in lumber and a trip to the thrift store for some second hand pots and pans. 3 hours later, a little paint, a little stain and voila... Sonny Side Up Mud Kitchen! Thanks for the plans Ana."

Farmhouse style doll beds modified width one less slat.

My 11 year old is a girlie girl and has been asking my wife and I for the American Girl Star Armoire cabinet for 2 years. I found a similar plan here on Ana-White's Plan page. I decide to use a little nice quality wood (Aspen) instead of just a clear pine wood. It turned out nicer than even I could have expected.

My daughter got this for her 11 Bday this past Sunday and has already filled the cabinet with all her special AG Dresses. I added my own twist by putting a 1/4" Chalkboard back on it so she can use it to play school with her AG Dolls.

I have a couple people interested in making one for them for Christmas. :)

My next project will be one of the bunk-beds featured on Ana's website.

I loved this plan. It fits perfect in our daughter's bedroom as a night stand.

Finally completed my Farmhouse table and bench today and couldn't wait to post pics (brag). Many, many thanks to Ana for sharing her talents with us. I am thoroughly enjoying my new hobby.

This man crate is a gift for a co worker who is retiring. We'll put all his keepsake gifts in here and he'll have to open it with a crowbar. :) The dimensions on this were adjusted to the size of 17" long, 12" wide, and 10 3/4" high (about the size of a case of copier paper). It is made with 1/2" birch plywood and poplar craft boards. I chose to use the hardwood plywood since I found out folks would be signing it, and it's much easier to write on this with a ballpoint pen than on regular plywood. Plus, less sanding for me to do ! ;)

To keep it from being so heavy when it's filled, I substituted 1/4" plywood for the top and bottom, and left the trim off of the ends. I arranged the pieces so the trim on the front & back covered the cut ends of the 1/2" plywood.

The lettering was traced on (it's "Stencil" font, in 105 pt size, printed from Powerpoint) using a ballpoint pen to dent the surface, then a black Sharpie pen to outline. Hubby thought it looked nice just with the letters in outline, and that's shown in the picture.

Also on this one, I made a little gift tag with some clip-art, and mod-podge'd it to the bottom.

I loved the idea of building a washer and dryer pedestal for extra laundry basket storage underneath! Sashua's is beautiful so I took her idea and modified it a bit to work for me. My washer is very, very heavy and I was worried that if there was no support under the weight in the middle, it would start to bow and sag. The original plan also put the washer too high for me to have been able to use without a step stool. So in my modification I screwed cleats into the 2X4 frame of the laundry room wall, placed the 3/4" plywood on top of it and screwed it in. In the front, I used 4X4's as the two corner leg supports and then added two 1X6 supports in the front center, creating three laundry basket bays. I placed it directly onto the floor as opposed to building the bottom base. This saved me money since I was able to buy half the lumber and also allowed me to lower the height of the platform while leaving enough space for my baskets. The top of my platform is approximately 14 1/2" high, which is just low enough so that I can see into the soap filling compartment at the top of the washer. Being that I'm only 5'2" I would have needed to use a step stool to use my washer at the original 19 1/2" plan height. I framed the top edge of the platform with 2X2's, to ensure that my washer or dryer never walked off the edge. Finally, I added some trim along the front edge and around the legs and that's it!

I needed some furniture for a summer tv room ( cooler downstairs) I was making. These sidetables and tv stand are loosely based off Ana's work.

I did this bed today in just a few hours. I am new to this site and have lots of project to be posted. I thank my wife for the lovely display. I am stationed in the Navy overseas and good furniture is hard to come by. The Euro makes stuff expensive and the military store carries lots of expensive "cheap" stuff. I started with a picnic table for the kids this past summer and my Facebook went out of control with request to build stuff. So, I do a lot of look a likes. I get to build things and my fellow service members get nice furniture for the cost of wood.(I get a little for me too). I hope you enjoy my projects because there are many more to come. If you want plans just ask I keep them in my head and can type them down and email them to you. Thanks Ana White for the great ideas! Happy New Year everyone.

First project of yours that I built. Came out so much better than I expected.

The plans were great! I hadn't built anything this big before but just followed the instructions step by step. I did also built a base to put it on (pavers on sand then pressure treated 2x6 frame). It took quite a while but that's just mostly because I had "helpers" and had to work on it when I had a spare minute. I was pleasantly surprised by how much we were able to pack in there. We added electricity and made a few other modifications to a larger shed we had so my husband could use that as an office. I built this to store all the tools, yard equipment, etc that we moved out of there.

Made this for my son's playroom. I added the cross supports in the base to make a sturdier chair.

We built this table for some friends and the build went great!

She brought over a table leg so that we could try to compliment their existing stain colors. I used "American Walnut" when maybe I should have used "Special walnut". It turned out a little reddish and I'm worried that she wont like it. I think it's beautiful but I'm so nervous!

What do you think about the finish?