Community Brag Posts

Farmhouse Workbench with Tool Storage

Submitted by vendo on Thu, 01/28/2021 - 10:47

I took Ana's Farmhouse potting bench plan and made it a workbench with some mods. I added the tool storage and adjusted it for different widths depending on the tools. I added some support under the tabletop to attach the tool storage piece. On the ends, instead of the X detail I built shelves for each end for added storage for screws and paint. Finally the pegboard back allows for more storage! The height is consistent with the height of my chop saw on my other workbench for when I need to chop longer boards. I am very happy with how this project turned out and it is now full and in use!

Built from Plan(s)
Finish Used
Briarsmoke by varathane
Recommended Skill Level
Starter Project

Comments

susan_c95

Mon, 02/01/2021 - 09:26

I agree totally with ladybug’13! What great modifications to this bench for tool storage and organization! I also love that it’s on casters to easily move it where needed. Great job!!!

One Arm Outdoor Sectional

Submitted by Anonymous (not verified) on Tue, 03/28/2017 - 13:25

We are loving this outdoor sectional! It was super easy to build! The hardest part was figuring out cushions. I made the bottom cushions and got the back pillows on sale at Costco for less than I could make them. Thank you!

Estimated Cost
Less than $100 not counting cushions.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Outdoor Sherwin Williams Sealskin
Recommended Skill Level
Beginner

Comments

Molzhon3

Mon, 07/08/2019 - 20:35

I love the cushions! Where did you find them? I’m building mine tomorrow but not sure where to get cushions. Thanks! 

The Modern Adirondack Leg and Foot Rest

Submitted by prelude on Fri, 02/05/2021 - 03:33

This Leg and Foot Rest is a perfect addition to the Modern Adirondack Chair designed by Ana White. Using the same basic design, the Leg and Foot Rest allows you to put up your legs and feet for added comfort while relaxing around the fire pit or patio.

Plans were created using SketchUp and include Shopping and Cut Lists.

For more details, contact Custom Wood Creations at https://gmarmo48.wixsite.com/mysite or write to us at [email protected]

Estimated Cost
100
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Exterior paint or stain
Recommended Skill Level
Beginner

Comments

Farmhouse table, bench, and 2x4 chairs

Submitted by palgier15 on Sat, 02/20/2021 - 08:51

Started with building the table for our ever expanding family. We priced out a new table and chairs at the price of $3700 and was able to build the table, bench and 5 chairs for $400. The table is perfect for our big family and very solid. The bench and chairs went together fairly easily. I adapted 1 of the chairs for my son who has to have arms to keep him safe. Great for any family.
2x4 chairs are from morelikehome.net day 4 build

Estimated Cost
$400
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Varathane Gel Stain Provincial
Varathane Polyurethane Semi-Gloss
Recommended Skill Level
Beginner

Deck swing

Submitted by Anonymous (not verified) on Wed, 04/05/2017 - 03:24

Used left over deck boards

Built from Plan(s)
Estimated Cost
20.00
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Beginner

Backyard Bliss!

Submitted by kdins31 on Mon, 01/12/2015 - 09:26

I built this outdoor play area for my kids this past summer.  The area under that portion of the deck was always messy and muddy and so I wanted to make use of it.  I built the deck and anchored it with lag bolts to the deck supports.  On the one side I used rubber mulch and on the other there is play sand.  I dug holes in various locations and filled with gravel to allow for drainage under the sand and mulch.  For the awning I used plain cedar shingles.  I added a shower that is just regular 1/2" metal pipe with a hose adaptor.  The shower wall and fence are just old pallets that I had for a while, cut to size, which was pretty much random but they came out great.  I added a misting system under the awning that works great, the kids love the cool mist on the hot days. Overall, a heavy job ripping up the grass, moving the wood, gravel, stones, sand and mulch, but a fun deck build and even better experience doing this with my kids by my side!  

Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Comments

Einman10

Tue, 12/29/2015 - 17:10

I'm extremely interested in the plans for the bathroom vanity with the step stool that pulls out for kids to be able to reach the sink.  Is there a way I can get those plans?

Rustic x console table

Submitted by Markb25 on Fri, 03/19/2021 - 14:39

Based on the rustic x console plans with a few small changes to cater to the space available.

Built entirely from 2x4 with the exception of the X's which are 2x2; I choose to use half-lap joints to make these, ordinarily I'd have these a lot neater but chose to leave them visable to add the the rustic feel.

For the finish I've oxidised the wood with a steel wool and white vinegar solution and then applied a light grey wash over the top.

Built from Plan(s)
Estimated Cost
50
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
White vinegar and still wool solution, grey wash and rustolium clear wax.
Recommended Skill Level
Beginner

Our Daughter's Playhouse

Submitted by jhedlund on Fri, 03/22/2013 - 06:17

We built this in early 2013. We ended up turning the house 90 degrees on the deck, because the slide worked best off the backside of the deck due to the various heights around the deck. The sloped back yard caused some challenges, but in the end it's a very sturdy deck with the cross beams attached. Thanks for posting these plans online for us, our 3 daughters are loving the playhouse and swingset! Here are some more pics of the project: http://www.flickr.com/photos/11031534@N00/sets/72157633009259873/

Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Comments

sgilly

Fri, 03/22/2013 - 15:07

Of course your girls love it - it's fantastic! Great job.

Robinwood

Fri, 03/22/2013 - 16:39

Love this - my grandson's back yard is too small to build something like this; which is why we had to settle for his loft bed airport/clubhouse.

slug

Thu, 06/27/2013 - 05:24

I'm planning on building two A-Frames and no playhouse, so my questions are focused there.

Did you do any modifications to swing portion of the plans?
Is it sturdy enough for an adult to swing on as well?
It looks like you put the posts in the ground, did you cement them in too?
How high off the ground is the bottom of the support beam for the swing?
Is there any issue side-to-side swaying?

Seasonal And Holiday

Beautiful planters!

Submitted by Anonymous (not verified) on Wed, 05/17/2017 - 17:32

I made 2 for my bare front patio

Built from Plan(s)
Estimated Cost
$38 for 2
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
None yet
Recommended Skill Level
Beginner

Entertainment System and Homeschool Bookshelves

We are a homeschooling family and desperately needed bookshelves. My husband made this entertainment system to reclaim space in style. It's gorgeous and functional! Thank you Ana for the plans!!

Comments

Kitchen Island Trolley

Submitted by naomi on Fri, 06/23/2017 - 08:29

Base was made from recycled timber and the top was made with new pine.

The rails were made from curtain rails. 

One end has wheels for easy moving.

Built from Plan(s)
Estimated Cost
$20
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Enamel Paint and Brown Japan Stain
Recommended Skill Level
Intermediate

Comments

sis2795

Wed, 07/31/2019 - 16:58

I don’t understand the cost for this. The wood is going to cost significantly more than $20. Am I an idiot and don’t know where to get the wood from??? How does that equal out to $20?

In reply to by sis2795

naomi

Sun, 08/11/2019 - 22:41

Hi,

All of the base was made from free pallet Wood and the timber top was one line length of new timber which cost about $8 and the wheels I had in the shed and the curtain rail was a couple of dollars from Bunnings. The paint and stain I already had.

I hope this helps. 😀

Pool equipment fence refresh

Submitted by Anonymous (not verified) on Thu, 07/06/2017 - 21:00

We love this fence refresh from the previous owner's solution to enclosing the pool equipment and a/c unit! It was the first time we fastened something to our house - drilling through stucco in the process. That was a big deal for us diy-ers! We made the frame out of 4x4's (which ended up being the most challenging part to the whole thing), applied the horizontal fencing boards and then used one of those $15 fence hardware kits - it was a great project that has made a huge difference in our backyard. Yay!

Estimated Cost
$300
Estimated Time Investment
Weekend Project (10-20 Hours)
Recommended Skill Level
Intermediate

Modified Apothecary End Table w/ Shims

Submitted by ncderemer on Sat, 04/11/2015 - 12:28

I made the shim bed a long time ago and really liked the look  and height of the apothecary side table. I can put all my books and stationary and the stuff I want stashed next to my bed. I modifyied the plan slightly to have shims make up the front panels so it has a slight rustic feel to it and matches my bed. Thanks to Ana's plans I am starting to make my own bedroom set for under $300 bucks and completely to my taste. 

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Flat black paint and kona stain
Recommended Skill Level
Beginner

Day bed

Submitted by Christinna on Thu, 09/07/2017 - 17:05

My sister needed a day bed for her guest room.  I modified the Modern Outdoor Chair plans to fit her needs.  We used an old door she found, even using the hinges as a means to attach the door to the bed frame.  This was my first real project.

 

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Paint
Recommended Skill Level
Beginner

Our first build

Submitted by artkdz on Sun, 04/10/2011 - 11:53

Actually built this last Summer, but just now getting around to posting it up.  Made it with Cypress, if I remember correctly, which is cheaper than Teak or other woods, but it's hard to stain because of the natural oils, and tends to flake a bit.  Didn't come out too badly, though, if I do say so myself.  Here's my little girl helping to show it off.

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
stain. Had to use something on the wood to prep it first to remove the natural oils
Recommended Skill Level
Beginner

My first project

Loved how these plans were so easy to follow and certainly appreciate the accompanying video.

Comments

Rustic X end table to cover up dog kennel

Submitted by Tashism on Fri, 06/21/2013 - 07:12

We are getting a puppy in a couple weeks and we want to crate train her. We have a small house so the only place we have to put the crate is in the living room. Needless to say, we needed a way to make the crate look good in our living room. That's when I found the plans for the rustic x-end table. The dimensions were almost the same as the dog crate. I only had to change the dimensions by a couple inches and wallah! Now the crate doesn't look out of place and I have a place to put my laptop and phone! I ended up ripping the 2x6's just a saw blade width down to get rid of the rounded edges and that made the top come together smoother. I also planed down the top a bit as well. In some spots, you can hardly tell they were 2x6's laminated together! I used two different stains on it. The first coat was a tudor stain but I wanted to warm it up a bit so I put a coat of antique walnut on it as well. I am very very happy with how this turned out. Now my husband would like me to build a coffee table to match!

Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Beginner

Comments

onenutsprague

Thu, 02/25/2016 - 08:59

This entire site is click bait. yet to see one actual plan. its like all stolen data from pinterist. which is equally as bad

Resized modern chairs with table

Submitted by CarolinaL on Thu, 12/28/2017 - 16:27

I needed chairs that would fit on my narrow front porch. This plan was great because I was able to resize it to 20x20. I used 1x4s that I already had and some wood glue. They turned out solid. I made the tryde table with left over wood. That one is 17.5x17.5. Super happy with the results. We are doing the garage shelves right now. I have a list of other things I want to make thanks to Ana's wonderful website. 

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Exterior Valspar with a paint sprayer
Recommended Skill Level
Beginner