Community Brag Posts

A lot of hard work went into this table, but Im so happy with the result. I followed Ana whites plans closely and read all the Blog comments to help out. I made the table one 1x6 board wider and 4 inches longer to fit my space better. I also used a turnbuckle and threaded pipe for the stretcher to make it look a little more like the Pottery Barn Table. I think it gives it more of an industrial look. I used a red mahogony stain and plenty of polyurethane finish. I still have to build the bench, and i'm looking forward to using the plans from this site.

These flat wall bookholders are the perfect little shelves to add storage for books to my boys' new tractor bunk bed. What a great simple plan!

A couple of years ago I used Ana White’s plan for a faux fireplace, the grandchildren always love hanging their stocking on it for Christmas. But I always wanted to dress it up a bit. I didn’t even attach it to the wall. It was plain, it really needed something.

Look what I did to it.

I added a hearth and faux bricks.

Thanks to the beautifully written as well as the example build post by Hilary, I found this project easy to build for a beginner like myself. I followed the plan as written and can't wait to start my next project.

This was my very first woodworking project! My girlfriend and I built it as a learning experience, and to use as a work stool in our "workshop" (aka garage). The wood we used was pine. We were so happy with the results we've decided to build more. Thank you Anthony DeCesare for posting the plans, and Ana White for many more amazing designs.

Thanks for fantastic plans Ana!!  My 12yr old son and I knocked these out in an afternoon.

He learned new skills and we got a key project done.  The best thing was his statement of "these are awesome!!"  

Second wood project overall. First with a power-saw. Just found Ana-White - love it and thanks for sharing it all! I had to change the dimensions of this one to fit the space we needed it for. It holds two paper bags side by side to hold all of our recycling. So much neater then our plastic bin we had.

Looking forward to the next project...

This project was very simple but an excellent experience. With a lot of patience on the finishing, it turned out absolutely beautiful too! The wood cost was higher because Home Depot was out of several of the size boards in the cheap pine and I didn't want to wait till I found them to start. I began the project with our trusty circular saw, but was quickly frustrated trying to get nice square cuts (and even lengths) so back to Home Depot we went. We came home with more wood, a 12" Sliding Compound Miter Saw and a Kreg Jig, which increased my cost just a tiny bit. But boy was I a happy girl! Especially since they are all mine (maybe I'll share w/the hubby and kiddo)! :o) After that, it went together very quickly. I added a 1" apron on the bottom shelf which hid the bracer - just tapped it in with the finishing nails. I also added screw-in padded feet, which means it sits nice and even and I don't have to worry about it scratching the floor (or the bottom of the table getting damaged). The only thing I did not enjoy was filling in all the pocket holes from the Kreg, which took forever. I definitely learned how important pocket hole placement is, as I ended up having to paint the legs instead of staining them (as originally planned) so I could hide all the huge holes. But it turned out better than expected so I'm happy this happened. I also recommend attaching the top, the top bracers and the bottom shelf after sanding and filling all the holes if using a Kreg. I actually attached both the top and the bottom shelf after I'd stained and painted. This allowed me to get in all the crevices and kept the stain out of the paint and the paint out of the stain! A few touch ups once I attached the top and put in the bottom shelf and voila! Sealed it with the wax and am thrilled with the finished product. And the best part is, my son is finally interested in building and even started his own table! Thanks to Ana's site, our build list is growing every day! There are just not enough (cool) hours in the day to build during our 100 degree Central Texas summer!

Using the instructions (with some slight redesign to accomodate the wife's requirements) I built two Versaille planters. The timber I used was offcuts from the local timber yard (£18) plus some bits off of old pallets. The nobs on top pf the legs were wooden drawer handles (£10) Screws and paint from the workshop. The overall size is a 21inch cube with the height increased to 23inches with the wooden knobs.

Thanks for the basic info it made the job so much easier.

I was planning to make a train table trundle for my son's bed, but once I saw this plan everything changed. I'm so SO happy with it. Modifications: 1) We took off the bottom shelf because hubby likes to stretch his long legs out underneath. 2) We used laminated pine project panels for the top, they cost more, but they were already the correct size, and the finished look of the top would be nicer. We altered the design to make the panels go lengthwise. So far so good, neither have bowed whatsoever. 3) we used inset handles from Lee Valley with an antiqued finish. I had yet to lacquer this when I took the photo because we couldn't wait to get the trains in there! I have since done 3 coats of minwax Poly to protect it from little hands, crayons, etc.... We're hoping this table will graduate cars, then to legos, and then....who knows!? Thanks to Ana and all the contributors here.

Followed the plans listed, and it went pretty well. We purchased our lumber from Lowe's & as many of you have experienced it was difficult to find good lumber. 

The only major issue I had was due to quality of lumber. I noticed when I went to install the 2 (1×12) panels for the base, the frame wasn't square. So some heavy sanding and cajoling got the base pieces locked in.

Had a lot of fun building this with my wife. She gets complete credit for the color, ans finished look. The table was treated with preconditioner for oil-based stains which brought out a lot of the pine yellows. The finish is actually 3 different stains: Minwax weathered oak, dark walnut, and classic grey...applied in that order. The classic grey was a light coat to help bring out a more naturally weathered look. It was sealed with three coats of polyacryllic and a light hand sanding with 400 grit paper.

The build itself only took a couple hours. Then about an hour and a half of good sanding. With all the finish work & allowing stain to dry this project took a little over a week.

My husband and I decided to make an entertainment center from the Apothecary Console plans. We mostly followed the plans, but wanted it to be taller than the original in case we want to use it in a dining room as a buffet in the future. To do this we just added another level of drawers. I wanted the drawers on the bottom to be wider, so each of them is four false front's wide. The wood on top is walnut from some trees my dad cut down over 25 years ago. We wanted more of this to show than would have if we followed the original plan, so we put a two inch trim piece around it. I really wanted card catalogue drawer pulls but couldn't find any that were dark that were at all "cheap"...so I bought gold ones online and spray painted them with a "hammered" spray paint which worked really well.

I built this table in one day by myself. Well, just me and these three kiddos. We were at Home Deopt selecting wood at 9am and by 7pm they were sitting on a finished table. Thank you so much for the easy to follow plans, Anna!

Sou Tatiana e moro no Brasil...

Essa foi a cama que fiz usando projeto deste blog. Minha filha amou e nós tb!!!

spare room home project

Love this design. Good project for beginners.