Community Brag Posts
Free standing pantry with coffe bar
I loved doing this project, I did a burn treatment on the door and I made the shelves adjustable. It took me a weekend to build and 2 days to stain and do a matte poly finish.
Brina Bedside table
Heavy modification to the original plan to accommodate extra drawers and trim. Finished with Min-Wax custom mixed color or Gunstock and English Chestnut.
Comments
Mon, 02/25/2013 - 11:16
Thanks they were well worth
Thanks they were well worth the extra time and material. We didn't want the space in the bottom to be a dust collector:)
Entry Table
Well after completing the console table I decided to change the sizes a little and create an entry table and stain it to match my great great grandmothers mirror that we have. That mirror has to weigh 50lbs. It turned out great and I did sanding and staining before putting it together which saved a lot of time trying to get into all of the corners. Then just had to ploy and stain the edges of the top once finished.
This is approximately half the width of the console table so calculations were fairly easy to figure out.
Comments
Heavy duty log peeling stations
I modified Anna's plans to make these heavy duty saw horses.
Farmhouse coffee table under 40 - ( 65 dollars Canadian)
This was my first project and had tons of fun building it. Can’t wait to build to end tables to match.
The plans are so easy to understand. The only change I made was instead of exposed screws I used the pocket hole method
Comments
Fri, 01/12/2024 - 08:33
Farmhouse table: Beginner
This is beautiful and just the look I'm going for with the color scheme. I am wondering if it would be easier to paint the wood before constructing it? Also, what is the pocket hole technique? I think I would like the screws hidden too.
Small Scrap Wood End Tables
We had shortened our kitchen windows in our above garbage apartment remodel and had 1x2 framing wood left. I did not want to put this wood to waste, so I made two identical end tables in a similar style as the Ikea Besta Burs desk plan, but without drawers. These were the first two pieces of standing furniture that I built for our apartment and was technically free for me to build. The end tables are truly small, being only 8" wide, 2' long, and about 18" high, which is a great size to place beside our low modular sofas. The top is made of 1/2"x8"x4' plywood leftover from a floating shelving project (worth about $2.50). I cut the plank in half and glued the halves to make it thicker. These end tables are strong enough to function also as little benches for me and my daughter. :)
Comments
In reply to Those are adorable! Very by Pam the Goatherd
Fri, 03/01/2013 - 00:24
Just Worked Out
Thank you! I actually hadn't seen the Ikea Besta Burs plan until after I built them. It just worked out that the scraps were about the size I needed to build them in that design. I don't think I can take credit for creativity when it was more like serendipity. :)
American Girl Doll Horse Stable
This was my first project with my daughter. After a divorce, I wanted something fun to do with my daughter-something where she would learn, have fun, and see a project from start to finish.
I did a lot of pre-cutting and prepping, but she did some cutting with a handsaw and mitre box, drilled holes with the Kreg jig, stained, used the nail gun, and glued. I installed the shingles, and touch up staining, but she did a lot of work for this project!
Since then, we have built a collapsible corral (fence) for her three horses, and next is the farmhouse bed for her doll!
Thank you for the great instructions, my daughter thinks I'm the greatest person on earth because of these projects!
Floating bench for entryway alcove
I was looking for some inspiration to clean up our small entryway room in our Cape Cod style home in Worcester, Massachusetts that was typically used for recycling and dirty shoes. These plans were very easy to follow and really spruced up the room quite a bit.
I used standard pine 2x4's for the frame and 1 inch boards for the bench platform and upper shelf features. The platform consists of four boards (3 1x6 boards and 1 1x5 board) that were glued together and sanded down. This was finished with Minwax Colonial Maple stain (a few coats), a couple coats of satin polyurethane, and then sanded down for a nice smooth finish.
I used a couple of 2x4's behind the vertical face below the shelf, giving it some depth and better stability.
Cast iron hooks were found on etsy, ebay, and Amazon.
Minwax satin polyurethane
Automotive turtle wax for a smooth shine
Kentwood Queen Bed
This is my first wood working project, ever. I think it was a little ambitious but I was inspired by the design and the simplicity of the directions. I was actually trembling when I used the circular saw for the first time. But now that the project is finished, I am inspired to do more. I have a list of other things I want to make.
Comments
Tue, 03/05/2013 - 09:07
You did an excellent job! I
You did an excellent job! I would never look at this and think a beginner had done it - it looks very professional and expensive! :)
Pet Kennel
This is my first post. I have used a few of the plans off of here before but I thought this one turned out really well and wanted to share. I used dowel rods to give it a more open feel and think it looks good. My dog loves it! Thanks.
My X Farmhouse Table
I had to alter some of the measurements to a smaller size for our dining room. 66" long 2x10's on the top. & 39" 2x4's across the base.
Chestwick Platform Bed - King Size
Wanted to build a simple platform bed to match our existing set that only had a queen. So I built a modified version of the Chestwick Platform Bed. Modified the plans to allow for a king size. I used rope molding at the bottom to match with our existing side tables. I wanted to be able to take it apart when needed, so I used knockdown hardware to be able to move it around in pieces if I ever needed.
Comments
Tue, 10/26/2021 - 10:46
King measurements
Can you please provide the measurements for the king? Your bed turned out amazing! I love the details.
Simple Blue Desk
My daughter needed a simple desk for her room. I had leftover purebond plywood from another project and a bunch of 2x4 scraps from the Reuse Hawaii store. This made for an inexpensive desk. I based my desk off the simple trestle desk but made changes as needed to accommodate my materials. I used the plywood as the desk top and added some 3/4 flat trim around the edge. I used a 2x4 instead of a 2x6 to attach the legs to the table.
This was a quick project and my daughter loves the fun color!
Comments
My Outdoor Sofa
Hi Ana
I would like to share my experience making this Outdoor sofa (see attached link). http://ana-white.com/2014/07/plans/outdoor-sofa-2x4s-ryobi-nation
The sofa is supposed to be made using 2x4 boards, but these are not a standard size in Australia so I substituted with 90 x 45mm pine boards. No other changes to measurements were necessary. I followed Ana's instructions and definitely recommend using wide clamps to hold the base when screwing together. I only had short clamps so was rather difficult keeping everything firmly in place when drilling the screws in.
Next step was preparation for staining. I used Cabot's pine filler to fill major holes, knots etc, then sanded lightly paying extra attention to the arms.
I stained using Cabot Exterior Varnish Stain (teak colour). This turned out a beautiful warm colour that I just love.
Finally the cushions....
For the base I purchased a 5inch thick foam single mattress (on sale $61 so worked out to be really cheap foam). I measured to fit base and cut using an electric knife - worked a treat! I had enough left over to do a cushion along the back plus two small side cushions to go along the arms.
Next step was covering the base and side cushions. I purchased some outdoor Decorating fabric from spotlight as sofa will be exposed to some QLD weather. For the base, I used a similar process to the Censational Girl box cushion cover using Velcro instead of zips.
http://www.centsationalgirl.com/2012/10/simple-sew-box-cushion-cover/
For the side and back cushion I made up 3 sides of the cover, then inserted foam and sewed the last end closed (cheating I know but just too awkward to do proper box ends).
Lastly, the throw cushions.....these were really easy I made envelope cushions from a single piece of fabric....once again no zips (hoorah!). They only took 10minutes each to make and look great. See tutorial below.
http://thehappyhousie.com/simple-speedy-stuffed-sewing-tutorial-diy-envelope-pillows/
My first build so extremely happy with the result!
Comments
Fri, 01/09/2015 - 17:12
Beautiful! I love that color
Beautiful! I love that color scheme and was going to ask where you bought the fabric, but it's probably not available here in the US.
Fri, 01/16/2015 - 03:08
Thanks Pam, the fabric is a
Thanks Pam, the fabric is a water and fade resistant polyester and was very easy to ses as it is not heavy like a canvas. I bought it from Spotlight here in Australia so may not be available in US. There doesn't seem to be a lot to choose from here in Australia (at least doe inexpensive fabrics) in comparison to US on-line stores such as Fabric.com.
Fri, 01/16/2015 - 03:08
Thanks Pam, the fabric is a
Thanks Pam, the fabric is a water and fade resistant polyester and was very easy to ses as it is not heavy like a canvas. I bought it from Spotlight here in Australia so may not be available in US. There doesn't seem to be a lot to choose from here in Australia (at least doe inexpensive fabrics) in comparison to US on-line stores such as Fabric.com.
Tue, 03/17/2015 - 04:28
Plan query
well done your project Jennyec -looks great and I'm going to attempt for my 2nd project.... I'm just a bit confused about the total timber needed for this project as my reading of the plans is 11 - 2x4x10' - did you use 11 pieces of 90x45mmx2.4m? Thanks heaps
Easiest Industrial Cart
Thank you for the project idea! We used your Easiest Industrial Cart plans. Since this is our first project building anything ever; so please excuse any "mistakes" you may notice. We tried going with a blue stain instead of just brown, but we ended up giving the wood more character by staining over with my husband's "Warhammer Paints"...lol...
Drop Zone/mudroom
I used ShelfHelpNow which I LOVED! Got it delivered at the start of a snowstorm! Would never have made it then if I had to go get the wood myself!
Got so many compliments and requests
To build this.
Thank you for your easy plans and wonderful ideas!
In hindsight I would have either connected the two units or separated them more. I’m more a wing it/see how it goes type of builder for myself rather than a planner. 🤣
Diane
Hopefully this will free up some room in my house for more utilitarian closet/pantry.
Classic Simple Bunk Bed
My boys had been begging me for bunk beds, but they were all so expensive! These were easy to make. I made these while my husband was away for military training. There are a lot of comments stating that you need more wood. And you do. The shopping list doesn't account for the 64" side rails. I ended up buying 11 of the 1x4 boards and that took care of everything with minimal left over. Lets see....what else...oh! When you are bolting the beds together, make sure you put a screw where there is another rail to catch it. The screws listed are long enough to go through the posts.. I had a lot of fun making these beds. My boys love it. I love this site and will be looking for more projects to get into!
Royal blue
Dog Crate Bookshelves
I took Ana's standard dog kennel, turned it 90 degrees and placed the door where the side would be. From there I built upward, including a book shelf section to use the space above the crate more effeciently. I also increased the height of the crate to 32 inches to match the height of a standard crate. The door was modified to use the large 3 inch pieces because the 2 inch was too flexible in my opinion. This is the second one I have built, learning from the mistakes of the first one. I added L brackets on the inside to make it so I could take it apart, and used the Kreig Jig so I can replace parts as they wear out or are gnawed on.
Comments
Adjusted for less projection
I adjusted the projection of the table by using just 2 2X6's and adjusting the shelves accordingly. Planning on making the coffee table very soon. I used tea then vinegar/steel wool to stain. The top is waxed to make dusting easier. I then screwed on 2 right angle mending brackets for looks.