A simple bookcase made from pallets and a few 1x4's.
The measurements will vary based on the size of the pallets used. Be on the lookout for donor pallets to provide wood for the shelves and support pieces. If you don't have enough pallet wood to make the shelves you'll need to buy some 1x4's In sketchup the shelves are 36" long.
1x2's approximately 36" per shelf, this will vary with the size of the pallets used.
As shown 2 10' 1x2's are needed
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!