Make a very tall and extra room storage tower complete with modern style doors! These DIY plans will add lots of storage to your space. Can be made with glass doors too! Full free plans you can follow to make your own.

Use as a closet or closet divider by adding closet rods to the outside for a chic wardrobe!

About Project

Inspired By:

http://www.ikea.com/us/en/catalog/products/S69894610/ [2]

Author Notes:

Special thanks to Leanne [3]for building this project today! I just love how this project turned out. And check out how tall it is - so much storage! Thank you Leanne!

[3]

When Ana asked me to build something for her site, I knew immediately what I needed. My craft room is in the process of a renovation and I wanted a cabinet that would allow me to see my most often used fabrics right away, but would also keep them closed off from dust and such.

[4]

This tower is HUGE and yet skinny enough to make the most of the space in a very small room! It has so much space for storage and plenty of room for my collection to grow. I could easily see this being used in an office too. I prefer a modern aesthetic so this is a very clean cut type of piece.

[5]

Don't Forget!

And one more thing - if you love this project, but don't have the materials budget, PureBond [6] is giving away a $100 Home Depot gift card every weekday in January! You can enter everyday - weekends included - for more chances to win! Here's all the details, [7] and it's very easy to enter!

Dimensions

Dimensions:

Dimensions:

92 3/4 H x 20 1/2 W x 13 1/4 D

Materials and Tools

Shopping List:

2 – 1x12 @ 8 feet long
1 – 1x12 @ 10 feet long (cut shelves from this board)
3 – 1x2 @ 8 feet long
3 – 1x4 @ 8 feet long
Hinges – either euro face frame mount or standard side mount to be mounted on exterior of cabinet.
Acrylic glass
Mirror clips
1 ¼” pocket hole screws
2” and 1 ¼” finish nails

1 1/4 inch finish nails

2 inch finish nails

1 1/4 inch pocket hole screws

wood glue

120 grit sandpaper

primer

paint

Tools:

measuring tape

square

pencil

hammer

safety glasses

Kreg Jig™ [8]

drill

compound miter saw

sander

Cut List

Cut List:

2 – 1x12 @ 92 ¾”
6 – 1x12 @ 19”
2 – 1x2 @ 92 ¾”
1 – 1x2 @ 17 1/2”
1 – 1x4 @ 17 ½”
1 – ¼” plywood @ 92 ¾” x 20 ½” OR Double face frame
2 – 1x4 @ 91”
6 – 1x4 @13 ½”
5 – ¼” acrylic glass @ 15” x 15”

General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Step 1

Build the box as show in the diagram. You can use either pocket holes or 2" screws or even finish nails, as this project is fully face framed for extra support on front and has a back.

Step 2

Attach back, using it to square up your project. Also attach to all shelves for the greatest support.

Step 3

Front trim can be nailed on or if you have a pocket hole jig, you can build the front face frame first, and then attach as one piece.

Step 4

Add the remaining pieces for the front face frame.

Step 5

You will need to construct the front door with pocket holes.

Step 6

If you are using glass or acrylic glass, attach with mirror hooks or glue. You can also use 1/4" plywood for the backs.

Step 7

Door is attached with hinges. The easiest method is hinges on the outsides.

Step 8

You may need a clasp to keep the door shut.

This cabinet MUST be secured to a stud in the wall behind as it will be very top heavy to prevent tipping.

Finishing Instructions

Preparation Instructions:

Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

Craft Room Storage Tower

Don't Forget!

Cabinets [9], Craftroom [10], Beginner [11], $150 - $200 [12], Modern [13]