• 3 feet of pallet boards OR 1x6 boards
• 2 feet of 1x boards in desired width (1x6s used in plan)
• 1 1/2” finish nails
• Wood glue
1 - 1x6 (or other board width) @ 12 1/2” (bottom)
2 - 1x6 (or same board width as bottom) @ 5 1/2” (sides)
2 - 5 1/2” wide pallet boards OR 1x6 boards 14” long (front/back)
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
You can easily adapt this plan for a wider box by simply using a wider width board. Just make sure you use the same board for the bottom as the sides.
Attach sides to bottom with glue and 2” nails. You can alternatively use 3/4” pocket holes and 1 1/4” pocket hole screws on underside.
Apply glue to exposed edges of front and back of box. Attach front and back with 2” finish nails and glue.
Make decorative storage boxes out of pallets! Free tutorial from Ana-White.com
For added charm, nail a house number or handles to front. Trying to stay low budget? Drill two holes and loop rope through to create beautiful rustic handles without much added cost!