Entrance Cabinet

Submitted by AndyH on Mon, 05/25/2015 - 14:35
Difficulty
Intermediate
| Print this plan

Entrance Cabinet measuring 36 inches wide, 35.75 inches tall and 17 inches deep.

The plan has slightly different sides to the pictures shown to make the build a bit easier.

Full downloadable plan available at http://www.andrewharriswoodwork.com/free-plans/

If you have any questions then please feel free to email me at info@andrewharriswoodwork.com

36 inches wide, 35.75 inches high and 17 inches high

Preparation

Shopping List

See downloadable plans

Cut List

See downloadable plans

Cutting Instructions

See downloadable plans

General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!

Finishing Instructions
Preparation Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth.

It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Help Improve This Plan

We apologize if there was an error in this plan. Please help us out and report any errors here.

Project Type
Room