Variation of the Pedestal Table on this site. This table is 90"L x 40 1/2"W x 31"H
Preparation
These are the basics of the wood size, i will add totals later today.
2x8
2x4
2x6
To be added
To be added
Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck!
It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.
Comments
Fairfam4
Sun, 06/02/2013 - 21:15
Directions
This table is beautiful! It said that the cut measurements and directions would be posted later and I was wondering when that might be. I'd love to make this table for our dining room! Thanks!
haallen
Wed, 06/19/2013 - 10:56
Plans?
I love this table! When do you think these plans will be up?
haallen
Wed, 06/19/2013 - 10:56
Plans?
I love this table! When do you think these plans will be up?
TJ
Wed, 06/19/2013 - 16:40
WOW...I LOVE IT
Question! Would I be able to achieve similar results without planing any boards? Simply by using stock lumber I mean?
thewoodbuilder
Thu, 06/20/2013 - 07:25
Table Top
I am almost done with the plans this is my first attempt with sketchup so it has been a process to say the least.
On the table top, I used stock lumber, and I did not have a planer. I used my table saw to cut an 1/8 of each side of boards to removed the rounded edges. Then glue and kreg jig them together. cleaned off any glue that squeezed out. Then I took my belt sander and sanded till all creases were smooth as a baby bottom. Sometimes I get a crack or a gap and I used stainable ProBond wood filler and sand again. When stained it looks awesome.
TJ
Thu, 06/20/2013 - 14:47
Thank you for such a quick
Thank you for such a quick reply!!!
Tama K.
Sat, 07/20/2013 - 23:39
any word on the full plan?
I have rounded up all the tools I should need...now I just need the full plan to get started. We only have a couple sunny months here in Oregon for building outdoors, so I'm anticipating the detailed plans for this project. Any chance they will be available soon?
Thanks ~
osufever
Mon, 08/05/2013 - 19:44
Progress?
Any more progress on this plan? Thanks!
BuilderWes
Wed, 08/07/2013 - 11:47
I Like it...plans update?
Table looks awesome. Gonna build it. Any update on plans?
rthopper
Wed, 08/07/2013 - 11:54
It's been over three months...
It's been over three months since this design was originally posted and roughly seven weeks since you posted that the plans were "almost done". Can we expect that plans will actually be provided? I love this table and really wanted to make it, but summer has nearly come and gone and I could have already built a table from a different design.......
evardy
Mon, 09/02/2013 - 15:26
tisk tisk rthopper
Not a very nice post to someone who provides her designs free of charge. You have no idea the reasons behind why she has been unable to post the plans. You post your comment like she owes you something. Nothing stopping you from finding other plans and moving ahead with you project. gheesh.
P.S. to everyone else - sorry to derail these posts by commenting to this. I can't stand rude people.
evardy
Mon, 09/02/2013 - 15:22
Hi Ana!
Just came across this table. Can't wait to make it. I appreciate you providing your plans. No doubt you are busy being a mom. I know how that is! Looking forward to the plans and having a fall/winter project. Thank you!
thewoodbuilder
Mon, 09/02/2013 - 15:36
Plans
sorry folks, I have been struggle using sketchup on these plans as I have never used before. Anna is not responsible for the plans being online for this as it was mine. :0) I will do my best to get finished asap.
T
Chenrezig12
Thu, 09/05/2013 - 16:20
Table!
Seeing that you just posted jst 2 days ago I can sertainly be a little more patient. :-) Not in a rush really. I have, infact, drawn up a design based
on your image and the orig 3 pedestal table. Curious as to how close I'd come. Considered sending them out to others but I really didn't want to rain on any parades. Looking forward to your completion. :-)
rockymtnmomma
Tue, 10/01/2013 - 18:50
The underside of the top
This table is lovely! I built a table very similar to this one except it had more of a box type pedestal in the middle. I am curious how the underside of the table top is attached and what it looks like. Will you post a picture of the underside of this table top please?
Thanks!
Chenrezig12
Mon, 10/14/2013 - 08:52
Underside!
You can look at the original plans for the Three Pedestal Table on Ana's sight here. That should help you figure out the underside leg mounting.
freefromburdens
Fri, 11/15/2013 - 01:46
Love thsi table
I love this table. You did a really great job. I actually plan on using different designs from different tables on this site but use your legs. Looks just like the ones from the triple pedestal table but with its own twist. Keep up the good work...
Veronica
Price0909
Sun, 03/09/2014 - 17:09
Plans available yet?
Just wondering if you can give the basic cuts.
I can kind of tell the 2x8s for the top.. What did you use for under the top planks?
Also was it (3) 2x4s butted up together for the base? How did you link them together ? Can you post a closer view of the base? So I can try to figure it out?
Thanks!!!!
cetaco
Mon, 09/15/2014 - 01:12
Dining table Update?
Ana? Hope you're okay. Is it possible to get the finished update? My wife and I love the table and can't wait to start. Thank you in advance. We love you're site. Thank you again for your help in all that you do.
Blessings. Hoping you're okay.
Mitch & Connie
Weekend Woodhacks
Mon, 09/15/2014 - 12:01
FARMHOUSE TABLE
Greetings. Very nice work on this table ... really like the joinery and stanin selection.
I am currnelty in the degisn process of a table very similiar in size to the one you have posted. On your design; What is the inner dimensions between the 2 pedestals?
Also, I noticed that you chose to use just a 2" support under the table top for additinal support as opposed to the 3 layer method. Are you using a 2X2 or 2x4? Have you added any additonal support. I will be using hardwoord and am not certain what type of support will be needed to prevent sagging, espeicaly for the area between pedestals. Thanks. Weekend Woodhacks
Weekend Woodhacks
Mon, 09/15/2014 - 12:05
FARMHOUSE TABLE
Greetings. Very nice work on this table ... really like the joinery and stain selection.
I am currnelty in the design process of a table very similiar in size to the one you have posted. On your design; What is the inner dimensions between the 2 pedestals?
Also, I noticed that you chose to use just a 2" support under the table top for additinal support as opposed to the 3 layer method. Are you using a 2X2 or 2x4? Have you added any additonal support. I will be using hardwoord and am not certain what type of support will be needed to prevent sagging, espeicaly for the area between pedestals. Thanks. Weekend Woodhacks
tjkuntz
Tue, 12/30/2014 - 18:54
Plans
When will these plans be available?
In reply to Plans by tjkuntz
Ana White
Wed, 12/31/2014 - 12:45
This build was modified from
This build was modified from these plans
http://ana-white.com/
tjkuntz
Tue, 12/30/2014 - 19:00
Pedestal Trestle Table plans
Where can I find these?
Thanks
In reply to Pedestal Trestle Table plans by tjkuntz
Ana White
Wed, 12/31/2014 - 12:45
This was modified from the
This was modified from the original plan
http://ana-white.com/
tjkuntz
Tue, 12/30/2014 - 19:01
Pedestal Trestle Table plans
Where can I find these?
Thanks
Almost heaven
Wed, 03/11/2015 - 15:00
Pedestal table
I'm new to this site and just saw this table. It's exactly what I'm looking for except it's from 2013 and it seems the instructions were never provided. Am I missing something? Is there any way I can get these plans?
Ana White Admin
Thu, 03/12/2015 - 10:30
Table Plans
That was a modified build from the original plan http://ana-white.com/2012/11/plans/triple-pedestal-farmhouse-table This link may also provide assistance http://www.diypete.com/stunning-led-concrete-patio-table-with-a-built-i… Hope this helps!
earlydawn81
Wed, 07/22/2015 - 17:30
I would love to make this
I would love to make this table, will plans be posted?
Schrockinater
Fri, 05/06/2016 - 16:52
Pedestal Table
I was hoping that you might still have the plans with cut lists for the pedestal table.
In reply to Pedestal Table by Schrockinater
Ana White
Sat, 05/07/2016 - 14:00
http://www.ana-white.com/2012
http://www.ana-white.com/2012/11/plans/triple-pedestal-farmhouse-table
allang
Fri, 10/28/2016 - 19:47
were these plans ever posted?
I can't find them.
In reply to were these plans ever posted? by allang
Ana White
Sat, 10/29/2016 - 15:00
There are not plans for this
There are not plans for this one specifically. This was a modification of th=
is plan http://www.ana-white.com/2012/11/plans/triple-pedestal-farmhouse-tab=
le
Check out the brag posts to see what others have done.
Sent from my iPhone
wdtunstall
Fri, 11/11/2016 - 11:36
I understand, but....
I understand that life takes up a LOT of our time and projects like creating plans need to take a back seat. I just have 2 quick questions: Your table is 90" (7 1/2 feet) long; how far apart are the legs and how far are the legs from the end of the table top?
Thank you for taking the time to show / tease us with this beautiful table.
svinson20
Sun, 01/29/2017 - 08:51
Are there plans for this
Are there plans for this somewhere. Thanks
DenBrenn
Wed, 01/10/2018 - 13:16
Pedestal Trestle Dining Table
When will the plans be available for this beautiful table? It's just what we want!
Thank you.
TruTalesFeats
Wed, 01/09/2019 - 13:26
PLANS
Am I missing something? I can't find the plans for this.
Mark C. Butler
Wed, 04/29/2020 - 19:53
Trestle Dining Table Plan
Where are the plans? I cannot find them. Plans = measurements for all parts of the table.