Submitted by Anonymous (not verified) on Tue, 09/06/2016 - 17:23

I needed more room, so I changed the dimensions to a 4 x 4 table.  Used the same amount of materials.  I made the side leg measurements 48" wide and the cross braces 45".  My top sheet of plywood is 48" x 48" and the bottom sheet is 48" x 41".  The rest of the leg measurements are the same. 

A little overkill on the screws, but made it extra sturdy. 

I saw this site, copied down the materials list, bought everything I needed and was finished before dinner.  I did it all myself, only had my husband cut the plywood, the rest was all me!  Woo hoo, so proud of myself!

I rough sanded the edges and corners to get rid of any splinters.

Estimated Cost
Estimated Time Investment
An Hour or Two (0-2 Hours)
Type of Wood
Spruce 2x4s and Plywood
Finish Used
Rough sanded the top, corners and edges.
Recommended Skill Level

Free Plans Made Possible By Our Sponsors