Community Brag Posts

Fillman Toddler Bed

Submitted by brogers67 on Thu, 10/24/2013 - 01:37

First build and totally happy with result . The excitement and smiles of our 18 months old grand-daughter was worth every effort !

Estimated Cost
$20 Aud
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Acrylic White Gloss
Recommended Skill Level
Starter Project

Comments

JoanneS

Thu, 10/24/2013 - 13:20

Love this bed! What a super cute room for your grand-daughter! Looks totally professional, would never guess this is a first build -- Great job!

DIY Star Wars TIE Fighter Bookshelf

To bring a bit of order to my son's growing book collection, I built him a TIE fighter bookshelf. (By him I mean me, because he doesn't really care about TIE fighters. Chewbacca? Yes.) I was able to make use of some scrap lumber I already owned. Paint was the only item I purchased for the project.

Estimated Cost
$7. The only item I needed to purchase was the paint.
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Gray and Black satin paint
Recommended Skill Level
Beginner

Comments

Bench!

Submitted by kcav1706 on Thu, 05/02/2019 - 06:24

I used Ana's website and found the plans for this awesome and adorable bench! I placed it on my front porch at my house and it really brings a feeling of "home" to the outside! The best part about it is that I only used six 2x4s and the cost was under $18! (If I would have read the first direction about cutting the long pieces first then I could have avoided going back to Home Depot for an additional 2x4 lol) Also- if you have never done a miter cut before that has to be a precise length, make sure to cut the board longer than what the plan says and then cut the angles. I made the mistake of making a cross cut at 13" and then making the 45° angle, causing it to be too short. 

 

Built from Plan(s)
Estimated Cost
$18
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Minwax Helmsman indoor/outdoor clear mini-gloss.
I first sanded everything, stained it with Minwax "Jacobean" color, sanded it again (220 grit) then used the protective finish. I sanded it lightly once more and then reapplied another coat of the finish.
Recommended Skill Level
Beginner

Rustic Hall Tree

Submitted by Anonymous (not verified) on Mon, 02/27/2023 - 14:31

I had a lot of fun making this. Thank Ana, I enjoy looking at your work and doing new projects.

Built from Plan(s)

Comments

Rustic Headboard

Submitted by beingbrook on Wed, 11/09/2011 - 08:26

Rustic headboard built in an afternoon. Total cost was only $35!

Estimated Cost
$40-60
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Oxidized the wood using tea followed by steel wool/vinegar mix. Finished with Annie Sloan clear wax. A detailed explanation can be found at my blog: http://beingbrook.com/rustic-headboard-aged-wood/
Recommended Skill Level
Starter Project

Comments

scott56

Wed, 11/09/2011 - 12:46

I thought the 56 in headboard was a little excessive. So I cut it down a foot. If you decide to do this take 6 inches off the top and the bottom so it looks portionally correct. Another thing I did that was not mentioned in the what I have read so far was use kregs joints to connect the inner panel. If you build it from the back you will not see any joints except the top ones on the foot board. I patched them with that elmers patch stuff and are no longer visible. Minus all the sanding I built two beds in a half day.

Ava-Drew

Wed, 11/09/2011 - 15:52

I was thinking of doing this headboard for the farmhouse storage bed. Did you use 4x4s or build the legs the way they are in the plan? I have several 3x3s for legs that I was planing on using with the kreg. How easy was it to get the boards lined up with the kreg?

Guest (not verified)

Tue, 11/15/2011 - 10:34

how much did you sand this headboard?

thanks

Brook@BeingBrook (not verified)

Tue, 11/15/2011 - 10:39

We sanded the boards before building since we got the cheapest grade of lumber they had. I also sanded it about 10 minutes after I removed all the paint stripper.

Brook@BeingBrook (not verified)

Tue, 11/15/2011 - 11:51

No just used a power sander. Was going for a rustic wood look so didn't worry about the sanding being perfect. Just wanted it smooth enough not to snag anything.

Mario (not verified)

Wed, 06/06/2012 - 12:37

Congratulations !!! and thanks for inspiring us by posting these photos of a terrific job!

I was just wondering..how did you manage to get the perfect light brown - chocolate tint shown on these photos??

I've followed the process described (oxidized the wood using tea followed by steel wool/vinegar mix) to the point. However, the result is grey tinted. even tried applying the process to different types of wood and applying less mix..even sanding it after the project dried and applying the clear wax..Same GREY result..

Please help!!

Brook @ BeingBrook (not verified)

Wed, 06/06/2012 - 13:26

Different woods will give a different finish. This project turned out a little browner than the other times I've used the tea/vinegar treatment. Probably because it was previously painted and then stripped. You can also buy dark wax that will help change the color. You might try finding a stain that is the color that you want and staining your project. Good luck!

Ante

Wed, 07/10/2013 - 12:53

where does the white come from in your wood. did you strip pre primed pine then tea and oxidation? thanks,ante

Super Storage TV Wall

Submitted by jgettings on Sat, 10/26/2013 - 14:10

This took me about a year to complete, start to finish, but there was a lot of downtime. I started by running the wires through the wall and taking the opportunity to add a ground to the outlet on this wall.

The bottom cabinets are from Ana's kitchen cabinet base plans, but they are a little shorter, shallower and do not have a toekick cut out. My hope is that this will serve as good practice to do an entire kitchen!! I built these based on my modified plans, pulled back the carpet (there is hardwood under them that I intend to expose at some point), popped off the baseboard, and installed these as if they were kitchen cabinets. The top is 6 pieces of whitewood 1x12's "Kregged" together - I wish I had used plywood but an entire piece would still not be long enough, so that was awkward either way. There is a simple piece of molding under the edge of the "countertop". At that point, not much got done all summer and we just had base cabinets with no uppers and no doors.

More recently, I finally got more time to work on this and created the upper shelves. I just kinda winged these. A whole bunch of 1x12's, I cut 4 the height of what I needed (about 5', from the countertop to the ceiling) and I made a bunch of shelves cut to size. I wound up making more shelves than we needed, but I put shelf pin holes in the vertical pieces so all of the upper shelves are adjustable! I used a kreg shelf pin jig and it worked great. The middle shelf above the TV was cut and added after everything else since I knew it would've been more difficult to calculate the length than to just measure after everything was in. I added some molding to cover up some things that didn't quite line up perfectly and to beef up the vertical pieces (1x2's make 'em look a little wider and cover the edges of the shelves). We finally have storage for all of the cd's and dvd's!!

I was a little nervous to do the doors, but the post for how to do doors came out at a perfect time. Turns out the hardware I bought way at the beginning was pretty cool and let you adjust up/down, distance from the cabinet, and left/right a few mm each way just by turning a screw. I'm glad I went with the fancy self-close-soft-close ones! I'm also in love with the handles I found.

I had some issues with the drawers and they don't slide perfectly, I think it's mostly a squareness issue. I'm planning on getting the kreg drawer jigs before I do the kitchen. I got the fancy soft close ones to see how they'd work to see if I want to use them in the kitchen, if I can't do a better job then I might opt for the cheaper ones!

I have intentions of adding crown molding to this room and that will go across the front of this when I do. I added a 1x4 across the top that can act as a base when we finally get around to that.

Estimated Cost
800
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Lots and lots of white paint. I wound up using a spray enamel for the upper shelves in attempt to make them less sticky after finding out that latex paint doesn't really work well for shelves. I've also learned that the paint with the primer in it is my new favorite type of paint.
Recommended Skill Level
Advanced

Comments

Clubhouse Bed Build

Submitted by Mrthe2th on Sun, 01/10/2016 - 00:03

I originally got the idea to build a bed for my son when I needed to get something new for him and went looking online for beds for sale on Craigslist. I found a bed that looked like a barn and that made me search for plans to build one since why overpay for something you can build yourself?! I found Ana’s plan and knew immediately it was the one. I started at Thanksgiving and had it finished for Christmas. I can’t thank Ana and Jamie from That’s My Letter enough for such great plans. They were so detailed but easy to follow. I do all my own rehab work on my house and I am a weekend warrior carpenter so this was a really fun build. My son is about to turn 5 and is a huge Star Wars fan and so am I. I knew this had to be my theme so I bought him a bunch of stickers and a sign (couldn't help myself on this one, had to do the Jedi like my father sign) to decorate the bed on Christmas day. He was excited to get the stickers but he didn’t know I built this for him. I hid it in the garage the whole time and he never found out. So when we went to his room to see if for the first time he went nuts. My 2 year old daughter loved it too and they play in it together all the time. I had a few issues during the build with some measurements but was able to make it work. In the end I love it and so do the kids, especially my son! The window grilles take it to another level so I recommend them if you build this. I even sanded a lot of the edges around the windows and in the doorway to give it a more “weathered” look. I already have my next project chosen from Ana’s plans. I will hopefully be posting the results of the X desk build in the near future. Thank you Ana for all the plans, I will most definitely be showing this off and giving you credit every time. Chris

Built from Plan(s)
Estimated Cost
Not sure, haven't done the math yet. Probably in the neighborhood of $400-$500 but I acquired some new tools too.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Thanks to nleonard85 for the idea to use Minwax Early American. Applied with a brush and rag. St. Louis Cardinal Red for the window grilles
Recommended Skill Level
Beginner

Writing Desk

I built this as a Mother’s Day present. There were a few hiccups (i.e. the cut list doesn’t include the drawer face which I didn’t know while shopping), but the plans were great and most of the project went smoothly. 

Built from Plan(s)
Estimated Cost
$70
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax Provincial
Recommended Skill Level
Beginner

2x4 Truss bench

Submitted by Anonymous (not verified) on Tue, 03/07/2023 - 14:52

We've been eyeballing this plan since it was first posted. We tend to accumulate extra 2x4s from other projects. Great easy build, was able to knock it out in a morning. The finish is a custom blend.

Built from Plan(s)

Comments

Flip Top Coffee Table

Submitted by angiemicn on Wed, 11/23/2011 - 01:11

Needed a sturdy coffee table and this plan was perfect. Doubles as a bench, extra storage in the hidden cubby underneath the flip top, holds football fiesta platters, beers, and when the parties not in full swing, I'm using as a sewing table as well. Love it. Used my Kreg jig for entire assembly so super sturdy and easy too. Modifications: 1x6 Pine boards, jigged together. love the look of pine and after assembly, meticulously sanded so feels like one piece of wood. Used the hidden hinges. Bottom shelf I made out of leftover 1x4's, to match the top. width is 36 inches. Had to fit in a tiny living room. Did add support to the bottom shelf, 2 1x2's under the 1x4's....my dog has already crawled onto the shelf.

Estimated Cost
free used leftover scraps
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Varathane Natural finish for top and shelf.
Kilz white primer 2 coats, and Behr Ultra White for legs and apron.
Recommended Skill Level
Intermediate

Comments

angiemicn

Sun, 02/05/2012 - 02:36

thank you so much! Glad you liked it, I love the contrast too!
Since it's essentially a holder for hubby's beer and snacks this kind of top can take a lot of abuse and still look great

Victoria Marie (not verified)

Tue, 02/21/2012 - 18:57

I love the look of this augmented plan. The 1x6 boards looks super sleek.

Can I ask you a question? I'm building this bench as my very first building project, and so far it is quite wobbly. I attached the shelves with one pocket hole in each corner through the shelf piece. You mentioned that yours is super sturdy. How did you attach the shelves?

Thanks! - Victoria

angiemicn

Wed, 02/22/2012 - 22:57

Victoria,
I made each side as a frame, looked like 2 rectangles and 2 squares. Those were both kregged together...then I put those frames, front, back and 2 sides together kregging those together. The shelves are all kregged in too. I don't know if that helps or not. I've used mine for extra seating.
good luck, angie

Rustic X coffee table

I love this site. We needed new furniture in are house and didn't want to spend a bunch of money. Finding the Rustic x plans was a life saver.

Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
White paint and kona stain.
Recommended Skill Level
Beginner

Play Kitchen

Submitted by Anonymous (not verified) on Wed, 01/13/2016 - 13:35

I made this set for my grandchild!  Love the plans!  I modified the stove to include a range-top microwave, and included doors for the kitchen sink.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Dark gray, black, and white paint.
Recommended Skill Level
Beginner

Farmhouse King bed headboard, frame and platform

I followed most of the farmhouse plans for the headboard and footboard.  Adjustments were made for the size of our mattress being 80x77 here in Canada.  Also the primary reason for building a bed was to get away from boxsprings as I am am just too sensitive with previous back injuries to they 'not so flat' feel.  Because of this I somewhat designed a slat system based on our mattress' guidelines for maximum gap between slats.  I framed a simple setup just 3/4" below the side rails so the slats would be flush with it.  Also our floor is not flat (yikes) so the side rail is not the same measurement from end to end it is instead done using a level (out 1/4" over about 7 feet).

 

 

Estimated Cost
Cost was actually near $500 here in Canada. Lumber in about $240 and I did not have any wasteful cuts. I did not have all of the screws, brad nails, glue and so on so the greater cost was paint plus hardware which was a shock. I do have plenty left over for future projects though. Still happy though as the bed would be far more new and I know its not made form mdf with a veneer. A week in and very happy still with everything.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
We ended up painting primarily because of the Cedar/Spruce contrast. The Cedar was primed then 2 coats of white. The Spruce was all done in 2 coats of white with about 8 hours between coats. We definitely cheated construction and started 4 hours after the last coat, which I wouldn't advise even though we didn't have issues. It was a risk because of a time crunch.

Behr No 7900 Alkyd Satin Enamel
Kilz Premium Primer/Sealer and stain blocker for the cedar
Recommended Skill Level
Beginner

Perfect!

Submitted by lbadger on Thu, 12/01/2011 - 06:59

I went round and round trying to figure out what type of shelving to install in our kitchen to go above a cabinet below that will be topped with a rough live edge pine slab (not yet completed). I stumbled across your industrial chic shelves post, found an old board laying around the yard and whalla! As always, thanks for this amazing site!!

Estimated Cost
n/a
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Cleaned up a bit, sanded down a bit and top coated with poly
Recommended Skill Level
Beginner

Comments

Young Mrs. (not verified)

Thu, 12/22/2011 - 12:44

Hi! Love how your shelves turned out. I was just wondering how much weight these shelves would hold. Looking at yours with plates on them, it seems like they hold quite a lot!

Did you use larger L-brackets or the same size that Ana used?

Thanks for posting your shelves!

Blue Stain Pine Farmhouse Storage Bed

Submitted by martint on Thu, 10/31/2013 - 13:11

This project was inspired and guided by the plans for the

Farmhouse Storage Bed with Hinged Footboard by birdsandsoap.

The most visible parts, head and foot board, are made of beetle-killed blue stain Lodgepole pine, locally sourced and milled.

The boxes are made of 3/4" maple plywood and rest on a frame of 1 by 2's. I am still working on the 6 drawers, which will have blue stain pine fronts as well.

The bed slats between the boxes are stapled to webbing and the first and last slat are held by dowels drilled into the supporting rails to prevent the slats from sliding around.

Knock-down design - by removing the few (non-loadbearing) screws that fasten the head/foot boards to the boxes, the bed can be disassembled into manageable/movable components.

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
AFM Safecoat PolyureSeal BP - Satin
Recommended Skill Level
Intermediate

Comments

Plant Stand or Side Table

Submitted by mtairymd on Sun, 01/17/2016 - 11:08

This project was made with two 2x4s and two solid wood round discs. Although it’s hard to see in the photos, the pillar has a unique shape due to the v-notched 2x4s. This design is very sturdy and should hold about anything you would like to place on it.  See Link for full build Instructions:

http://www.instructables.com/id/Side-Table-or-Plant-Stand-Made-From-2x4…

Estimated Cost
$20
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Stain
Recommended Skill Level
Beginner

My wife built a bed.

Submitted by AKMan279 on Sun, 06/02/2019 - 20:45

We looked for a simple plan for a bed and found this one on Ana’s site.  Easy to build in a weekend.

Estimated Cost
$140 with all lumber and stain.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Poly stain
Recommended Skill Level
Beginner

Comments

We love our mini bedside tables

Submitted by Anonymous (not verified) on Tue, 03/21/2023 - 16:27

The sublime beauty of the natural wood grain upstages my (considerably) modest skill but we are very happy with our nightstands. Thanks so much for the plans! Rendered in Walnut with Tung Oil finish. Slight modification in dimensions and drawer facing.

Built from Plan(s)

Comments

Farmhouse Coffee Table

This was my first project and while I prepared to build it I had to endure some real negative forces coming from people who knew my building skills. But I was heart set on doing this and proving people wrong.

As you can see from the pictures I made some adjustments to the table as I did not want a square table rather a rectangle to fit perfectly in front of my sectional, LOL.

I could not believe how well it came out and how easy it was to build. Thank you Ana for this site as I know I would never have taken on this project without finding this site. Furniture building is something I always wanted to do and have as a hobby. I will NEVER purchase another piece of furniture from a store again!

I have included a few pics to show the progress.

Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Initially stained using Ebony minwax then painted over with Pottery Barn Blue (Van Courtland Blue). Then scuffed with sandpaper to give some distressing.
Recommended Skill Level
Beginner

Comments